SCHWANITZ Felling Grapple 600-B-EX-19-ST for excavators consisting of PowerHand with felling box

SCHWANITZ Felling Grapple 600-B-EX-19-ST for fixed attachment to excavator 12-18t

• Based on very stable Powerhand EX28-B with 5 tines made of 50 mm Hardox
• Grapple equipped with tooth bars for safe handling of standing trees

SCHWANITZ Felling Box 550-19

• HULTDINS saw cassette SuperSaw 550-19 with sturdy protective housing made of Hardox
• Low rootstocks by attaching the saw with motor protected towards the grapple and rail downwards
• The felling box made of high-quality construction steel and with a profiled bottom plate made of Hardox can withstand even harder impacts without deformation 
• Engages are milled into the underside for easier access to the sprocket and chain tensioner 
• Rail length 90 cm, max. crosscut diameter 650 mm
• All components protected in housing
• Easy installation, can be adapted to equipment with different hydraulics
• Oil requirement from 120 l/min and 180-250 bar, max. oil flow 169 l/min
• Harvester chain ,404" pitch with up to 40 m/s cutting speed (achieved at 169 l/min and sprocket with 13 teeth)
• We work with a sprocket with 11 teeth, lowering chain speeds to 33 m/sec, which reduces wear and reduces the risk of chain shot  
• Maximum power consumption of the chain Oregon 19HX, max 50 kW (which corresponds to 169 l/min at 182 bar), Stihl RMHS max 65 kW which corresponds to 170 l/min at 230 bar   
• Automatic chain tensioning and proportional chain lubrication.
• Quick and easy exchange of bar and chain
• Specially designed as an installation component for felling grapples
• Hole pattern in housing for variable mounting options
• Grapple is very stable, is also suitable for handling stones, roots, beams, etc.
• Powerful slewing drive 
• The large gear wheel has bronze teeth for low friction even when moving under heavy load
• The housing is filled with Mobil OGL007 fluid grease 
• Drive via worm shaft with hydraulic motor BMR160 = 157,2 ccm
• Maximum torque: 9464 Nm
• Tilting torque (max.): 135.6 kNm
• Hold torque: 72.3 kNm
• Axial load (max.): 1110 kN
• Radial load (max.): 414 kN
• Worm gear ratio: 104: 1