Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 8
No results were found for the filter!
1 From 8

Buy HULTDINS Multi-use grapples at PHILIPP forest tools

HULTDINS Multi-use grapples of the MultiGrip series are very stable grapples for attachment to excavators , which are particularly suitable for use on construction sites , for laying pipes , curb stones , railway sleepers and tracks or for handling scrap . One of the first grapple from HULTDINS, which was primarily developed for the construction industry, is the MultiGrip.

HULTDINS Multi-use grapple grabs of the MultiGrip-R series are also very stable grapple for attachment to Excavator, which are particularly suitable for handling sticks , energy wood , roots , wood waste and recycling material. The MultiGrip-R grapple are equipped with 4 sturdy tines with stiffeners.

The Multigrip grapple emerged from the development of the SuperGrip grapple by HULTDINS. The MultiGrip has a similar structure to a wood Timber grapples, its claws interlock. However, it is much more flexible . With its interlocking claws, you are very flexible. The MulitGrip is often used for gripping , holding and positioning logs , railway sleepers , beams and bars made of steel and concrete . You can also use the MultiGrip for dangerous felling and thus remove problematic trees piece by piece.

The multi -function grippers of the MultiGrip and MultiGrip-R series from HULTDINS are suitable for permanent attachment to the Excavator . The accumulator and the load holding valve are integrated in the upper part . The claw plates are made of Weldox steel, the claw cutting edge of Hardox steel.

The MulitGrip and MultiGrip-R Multi-use grapple grippers are also suitable for attaching a HULTDINS HULTDINS grapple- SuperSaw 550 or SuperSaw 550-S saw .

The HULTDINS MultiGrip / MultiGrip-R is available in 3 sizes:

model For Excavator (t) Opening width (mm) Calculated cross-sectional area (sqm) Cross-sectional area practically (sqm) Weight (kg)
MultiGrip 12 /
MultiGrip 12-R
08-14 1,496 0.26 0.42 315
MultiGrip 16 /
MultiGrip 16-R
12-18 1,822 0.36 0.42 490
MultiGrip 20 /
MultiGrip 20-R
16-24 2,279 0.52 0.62 560

 

The following recordings are available:

Alternatively: plate for attaching an individual quick coupler

If you frequently handle heavy stones , we recommend the HULTDINS MultiGrip TL grapple . It is suitable for handling stones , scrap metal , root stocks , railway sleepers and bars . In addition, the MultiGrip TL is ideally suited for handling long timber with an Excavator . The idea for the TL grapple originally came from North America, where it loads trucks with heavy logs. A demanding job that requires a robust construction. As an indestructible multifunctional gripper, the TL is also suitable for skidders .

The MultiGrip TL is also represented by numerous models and differs from the MultiGrip 430 in terms of load capacity, cross-sectional area and Opening width :

All MultiGrip TL versions are available with holders for the following quick couplers:

  • OQ60
  • OQ70
  • OQ80
  • S60
  • S70

As well as with a suitable holder for INDEXATOR XR rotators .

Do you have any questions about a Multigrip Multi-use grapple gripper and need professional advice? Then feel free to contact our staff. They will find the best solution for you and your requirements.

HULTDINS Multi-use grapples  of the MultiGrip series are very stable grapples for attachment to excavators , which are particularly suitable for use on construction sites , for... read more »
Close window
Buy HULTDINS Multi-use grapples at PHILIPP forest tools

HULTDINS Multi-use grapples of the MultiGrip series are very stable grapples for attachment to excavators , which are particularly suitable for use on construction sites , for laying pipes , curb stones , railway sleepers and tracks or for handling scrap . One of the first grapple from HULTDINS, which was primarily developed for the construction industry, is the MultiGrip.

HULTDINS Multi-use grapple grabs of the MultiGrip-R series are also very stable grapple for attachment to Excavator, which are particularly suitable for handling sticks , energy wood , roots , wood waste and recycling material. The MultiGrip-R grapple are equipped with 4 sturdy tines with stiffeners.

The Multigrip grapple emerged from the development of the SuperGrip grapple by HULTDINS. The MultiGrip has a similar structure to a wood Timber grapples, its claws interlock. However, it is much more flexible . With its interlocking claws, you are very flexible. The MulitGrip is often used for gripping , holding and positioning logs , railway sleepers , beams and bars made of steel and concrete . You can also use the MultiGrip for dangerous felling and thus remove problematic trees piece by piece.

The multi -function grippers of the MultiGrip and MultiGrip-R series from HULTDINS are suitable for permanent attachment to the Excavator . The accumulator and the load holding valve are integrated in the upper part . The claw plates are made of Weldox steel, the claw cutting edge of Hardox steel.

The MulitGrip and MultiGrip-R Multi-use grapple grippers are also suitable for attaching a HULTDINS HULTDINS grapple- SuperSaw 550 or SuperSaw 550-S saw .

The HULTDINS MultiGrip / MultiGrip-R is available in 3 sizes:

model For Excavator (t) Opening width (mm) Calculated cross-sectional area (sqm) Cross-sectional area practically (sqm) Weight (kg)
MultiGrip 12 /
MultiGrip 12-R
08-14 1,496 0.26 0.42 315
MultiGrip 16 /
MultiGrip 16-R
12-18 1,822 0.36 0.42 490
MultiGrip 20 /
MultiGrip 20-R
16-24 2,279 0.52 0.62 560

 

The following recordings are available:

Alternatively: plate for attaching an individual quick coupler

If you frequently handle heavy stones , we recommend the HULTDINS MultiGrip TL grapple . It is suitable for handling stones , scrap metal , root stocks , railway sleepers and bars . In addition, the MultiGrip TL is ideally suited for handling long timber with an Excavator . The idea for the TL grapple originally came from North America, where it loads trucks with heavy logs. A demanding job that requires a robust construction. As an indestructible multifunctional gripper, the TL is also suitable for skidders .

The MultiGrip TL is also represented by numerous models and differs from the MultiGrip 430 in terms of load capacity, cross-sectional area and Opening width :

All MultiGrip TL versions are available with holders for the following quick couplers:

  • OQ60
  • OQ70
  • OQ80
  • S60
  • S70

As well as with a suitable holder for INDEXATOR XR rotators .

Do you have any questions about a Multigrip Multi-use grapple gripper and need professional advice? Then feel free to contact our staff. They will find the best solution for you and your requirements.

Viewed

OUR KNOW-HOW. YOUR SECURITY.

We at PHILIPP are your experienced specialists for the products of the manufacturers HULTDINS, INDEXATOR, CLARK TRACKS, NORDCHAIN, MESERA and SCHWANITZ, which stand for quality, durability and economy.

For 25 years we have been the importers and expert contacts for machine builders, body manufacturers, workshops and dealers when it comes to the market-leading products from HULTDINS and INDEXATOR.

We are happy to advise you individually and always strive to offer you the best technical solution for your application. Our claim is to recommend the most economical solution for you in the long term, which is at the same time ergonomic and ecologically sensible.

Our speciality is to create custom-made products for the respective application of our customers. In cooperation with our sister company SCHWANITZ, we develop and produce innovative solutions for the forestry, agricultural and construction industries as well as for timber transport.

Our product range includes:

We stock spare parts for all products from HULTDINS, INDEXATOR, ClarkTracks, popular MESERA /LOGLIFT® forestry cranes and many more. Even if your rotator, grapple or forestry crane has been in use for a few years, we are sure to find the right spare part for you quickly.

You can rely on us! We always have your ability to work and that of your customers in mind.

The secret of our success at PHILIPP lies in our team's comprehensive expertise, personal customer advice, market-leading product selection and professional handling. Our claim is to find product solutions that help our customers get ahead.

All orders for products in stock that we receive by 2.45 p.m. are shipped the same day by UPS or freight forwarding. Thereafter, same-day express overnight shipping is available for orders placed by 4:45 p.m. to ensure that shipments reach you by 6 a.m. the next morning.<7p>

You can reach us personally by telephone from Monday to Friday from 07:00 am to 07:00 pm and on Saturdays from 09:00 am to 01:00 pm. In urgent cases, you can also reach us outside these opening hours on +49 7221 99561-0 via call forwarding. And around the clock via our online shop.

We look forward to hearing from you!


Your PHILIPP Team