Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

Buy HULTDINS sorting grapples from PHILIPP forest tools

The HULTDINS MultiGrip-T grapple is a stable sorting grapple that can be used in many ways for handling and sorting . Its claws grip point after point . They consist of four stable bars that are stiffened by perforated sheets. The sorting grab is therefore very well suited for sorting and handling construction waste , beams , pipes , scrap , residual wood or waste .

When developing the MultiGrip grapple , HULTDINS was able to fall back on the extensive and long-term experience in the production of professional Timber grapples . All the features that distinguish the SuperGrip grapple from HULTDINS can also be found in the MultiGrip grippers.

The high-quality sorting grabs from HULTDINS are equipped with a very stable upper part , 2 parallel bars made of solid material and a durable cylinder with end position cushioning . An accumulator and a load holding valve are integrated in the upper part . The claw plates are made of 20 mm Weldox steel and have mechanical stops in both end positions. The stable claw cutting edge is made of Hardox as a reversible wear plate.

The MultiGrip-T grapple, MG-T for short, are available with all common holders for quick couplers and also with a holder for INDEXATOR XR rotators. We focus entirely on your requirements. We can also deliver the MultiGrip-T with a plate for attaching your individual quick coupler.

The HULTDINS MultiGrip-T is available in 2 sizes:

  • MultiGrip 16-T
    • For Excavator 12-18 t in permanent attachment
    • Opening width: 1,773 mm
    • Calculated cross-sectional area: 0.36 sqm
    • Cross-sectional area practically: 0.42 square meters
    • Weight: 630 kg
    • Continuous load max. 10,000 kg

     

  • MultiGrip 20-T
    • For Excavator 16-22 t
    • Opening width: 2,279 mm
    • Calculated cross-sectional area: 0.52 square meters
    • Cross-sectional area practically: 0.62 square meters
    • Weight: 900 kg
    • Continuous load max. 10,000 kg

 

For example, the following recordings are available:

 

Alternatively: plate for attaching an individual quick coupler

Are you looking for a suitable sorting grab for your Excavator? We would be happy to advise you personally. You are welcome to contact our competent staff by phone.

The HULTDINS MultiGrip-T grapple is a stable sorting grapple  that can be used in many ways for handling and sorting . Its claws grip point after point . They consist of four... read more »
Close window
Buy HULTDINS sorting grapples from PHILIPP forest tools

The HULTDINS MultiGrip-T grapple is a stable sorting grapple that can be used in many ways for handling and sorting . Its claws grip point after point . They consist of four stable bars that are stiffened by perforated sheets. The sorting grab is therefore very well suited for sorting and handling construction waste , beams , pipes , scrap , residual wood or waste .

When developing the MultiGrip grapple , HULTDINS was able to fall back on the extensive and long-term experience in the production of professional Timber grapples . All the features that distinguish the SuperGrip grapple from HULTDINS can also be found in the MultiGrip grippers.

The high-quality sorting grabs from HULTDINS are equipped with a very stable upper part , 2 parallel bars made of solid material and a durable cylinder with end position cushioning . An accumulator and a load holding valve are integrated in the upper part . The claw plates are made of 20 mm Weldox steel and have mechanical stops in both end positions. The stable claw cutting edge is made of Hardox as a reversible wear plate.

The MultiGrip-T grapple, MG-T for short, are available with all common holders for quick couplers and also with a holder for INDEXATOR XR rotators. We focus entirely on your requirements. We can also deliver the MultiGrip-T with a plate for attaching your individual quick coupler.

The HULTDINS MultiGrip-T is available in 2 sizes:

  • MultiGrip 16-T
    • For Excavator 12-18 t in permanent attachment
    • Opening width: 1,773 mm
    • Calculated cross-sectional area: 0.36 sqm
    • Cross-sectional area practically: 0.42 square meters
    • Weight: 630 kg
    • Continuous load max. 10,000 kg

     

  • MultiGrip 20-T
    • For Excavator 16-22 t
    • Opening width: 2,279 mm
    • Calculated cross-sectional area: 0.52 square meters
    • Cross-sectional area practically: 0.62 square meters
    • Weight: 900 kg
    • Continuous load max. 10,000 kg

 

For example, the following recordings are available:

 

Alternatively: plate for attaching an individual quick coupler

Are you looking for a suitable sorting grab for your Excavator? We would be happy to advise you personally. You are welcome to contact our competent staff by phone.

Viewed

OUR KNOW-HOW. YOUR SECURITY.

We at PHILIPP are your experienced specialists for the products of the manufacturers HULTDINS, INDEXATOR, CLARK TRACKS, NORDCHAIN, MESERA and SCHWANITZ, which stand for quality, durability and economy.

For 25 years we have been the importers and expert contacts for machine builders, body manufacturers, workshops and dealers when it comes to the market-leading products from HULTDINS and INDEXATOR.

We are happy to advise you individually and always strive to offer you the best technical solution for your application. Our claim is to recommend the most economical solution for you in the long term, which is at the same time ergonomic and ecologically sensible.

Our speciality is to create custom-made products for the respective application of our customers. In cooperation with our sister company SCHWANITZ, we develop and produce innovative solutions for the forestry, agricultural and construction industries as well as for timber transport.

Our product range includes:

We stock spare parts for all products from HULTDINS, INDEXATOR, ClarkTracks, popular MESERA /LOGLIFT® forestry cranes and many more. Even if your rotator, grapple or forestry crane has been in use for a few years, we are sure to find the right spare part for you quickly.

You can rely on us! We always have your ability to work and that of your customers in mind.

The secret of our success at PHILIPP lies in our team's comprehensive expertise, personal customer advice, market-leading product selection and professional handling. Our claim is to find product solutions that help our customers get ahead.

All orders for products in stock that we receive by 2.45 p.m. are shipped the same day by UPS or freight forwarding. Thereafter, same-day express overnight shipping is available for orders placed by 4:45 p.m. to ensure that shipments reach you by 6 a.m. the next morning.<7p>

You can reach us personally by telephone from Monday to Friday from 07:00 am to 07:00 pm and on Saturdays from 09:00 am to 01:00 pm. In urgent cases, you can also reach us outside these opening hours on +49 7221 99561-0 via call forwarding. And around the clock via our online shop.

We look forward to hearing from you!


Your PHILIPP Team