Close filters
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

Buy SR built-in rotators from PHILIPP ForstWerkzeuge

The SR built-in rotators from INDEXATOR are a special development for large grapple tractors. The motor and the bearing are protected in the boom housing . Only the clevis, which picks up the pendulum on which the large grapple is attached, looks out of the housing. SR rotators permanently cope with the enormous pulling forces of the powerful machines . Like the IR rotators from INDEXATOR, they are designed for a long life . Drive and bearings are decoupled from each other, which ensures long, trouble-free operation and enables easy overhaul after many thousands of working hours .

Which variants from the series of SR built-in rotators from INDEXATOR do we have in our program?

There are 2 versions with different mounts below to choose from:

Built-in rotator SR 210B

  • Strong and stable rotator for tough use when moving long logs with grapple tractors (Grapple Skidder)
  • Maximum static load: 19,000 kg
  • Maximum dynamic load: 13,000 kg
  • Torque: 4,100 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Top mount: flange with bore and thread (bolt circle 16x21-346 mm)
  • Bottom mount: fork head with 2 tabs (168.9 mm spacing with 76.2 mm hole)
  • Also suitable for negative loads

 

Built-in rotator SR 211B

  • Strong and stable rotator for tough use when moving logs with grapple tractors (Grapple Skidder)
  • Maximum static load: 19,000 kg
  • Maximum dynamic load: 13,000 kg
  • Torque: 4,100 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Top mount: flange with bore and thread (bolt circle 16x21-346 mm)
  • Bottom mount: fork head with 2 tabs (168.9 mm spacing with 66.7 mm bore)
  • Also suitable for negative loads

We would be happy to advise you on the selection of the right rotators model for your application.

Suitable spare parts for your built-in rotator from INDEXATOR can be found in our digital spare parts lists or via our spare parts finder for rotators.

The SR built-in rotators from INDEXATOR are a special development for large grapple tractors. The motor and the bearing are protected in the boom housing . Only the clevis, which... read more »
Close window
Buy SR built-in rotators from PHILIPP ForstWerkzeuge

The SR built-in rotators from INDEXATOR are a special development for large grapple tractors. The motor and the bearing are protected in the boom housing . Only the clevis, which picks up the pendulum on which the large grapple is attached, looks out of the housing. SR rotators permanently cope with the enormous pulling forces of the powerful machines . Like the IR rotators from INDEXATOR, they are designed for a long life . Drive and bearings are decoupled from each other, which ensures long, trouble-free operation and enables easy overhaul after many thousands of working hours .

Which variants from the series of SR built-in rotators from INDEXATOR do we have in our program?

There are 2 versions with different mounts below to choose from:

Built-in rotator SR 210B

  • Strong and stable rotator for tough use when moving long logs with grapple tractors (Grapple Skidder)
  • Maximum static load: 19,000 kg
  • Maximum dynamic load: 13,000 kg
  • Torque: 4,100 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Top mount: flange with bore and thread (bolt circle 16x21-346 mm)
  • Bottom mount: fork head with 2 tabs (168.9 mm spacing with 76.2 mm hole)
  • Also suitable for negative loads

 

Built-in rotator SR 211B

  • Strong and stable rotator for tough use when moving logs with grapple tractors (Grapple Skidder)
  • Maximum static load: 19,000 kg
  • Maximum dynamic load: 13,000 kg
  • Torque: 4,100 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Top mount: flange with bore and thread (bolt circle 16x21-346 mm)
  • Bottom mount: fork head with 2 tabs (168.9 mm spacing with 66.7 mm bore)
  • Also suitable for negative loads

We would be happy to advise you on the selection of the right rotators model for your application.

Suitable spare parts for your built-in rotator from INDEXATOR can be found in our digital spare parts lists or via our spare parts finder for rotators.

Viewed

OUR KNOW-HOW. YOUR SECURITY.

We at PHILIPP ForstWerkzeuge are your experienced specialists for the products of the brands HULTDINS, INDEXATOR, CLARK TRACKS and NORDCHAIN .

For more than 20 years we have been the expert contact for machine builders, body manufacturers and workshops when it comes to the market leading products from HULTDINS and INDEXATOR .

We would be happy to advise you individually and strive to always offer you the best technical solution for your application . Our aim is to recommend the most economical long-term solution for you , which is ergonomically and ecologically sensible at the same time.

Our product range includes:

We ensure the supply of spare parts for our entire product range - even many years after the purchase.

We stock all the important spare parts for HULTDINS and INDEXATOR , as well as many spare parts that are only needed occasionally. We always keep an eye on your ability to work and that of your customers. You can rely on us!

All orders that we receive until 3 p.m. for products in stock are dispatched the same day by UPS or forwarding agent. Then same day if you order by 4:45 p.m. by express.

Even if your last order was several years ago, we are and will remain your contact person and will be happy to provide you with comprehensive support. At PHILIPP ForstWerkzeuge we stand for individual advice , specialist knowledge, accessibility and the availability of our products .

You can reach us personally by phone from Monday to Friday from 7 a.m. to 7 p.m., on Saturdays from 9 a.m. to 1 p.m. and in urgent cases also by diverting calls outside of these opening hours.