GalaGrip P-300-S on crane arm extension with mounting plate for excavator attachment


GalaGrip P-300-S on crane arm extension with mounting plate for excavator attachment

available again from KW 14.2024

List price €10,942.00 excluding VAT

Please log in to see your prices as a reseller.
You don't have an account yet? Register here quickly and easily.

Prices plus VAT plus shipping costs

  • GALA-GRIP-P-300-S-K
  • SCHWANITZ
SCHWANITZ GalaGrip P-300-S on crane arm extension with mounting plate for excavator attachment Consisting of:

SCHWANITZ mounting plate suitable for Lehnhoff MS08 SCHWANITZ crane arm extension 2,000 mm 2.0 t
  • For Excavator 12-18 t
  • Trunk comb on the underside to be able to lift long logs completely on one side
  • Trunk support on the front to be able to push trees in the direction of felling
  • Adapter plate to accommodate any quick coupler mounting plates
  • Mounting on the handle tip 100 mm wide and 45 mm bolts for INDEXATOR links and swing dampers
  • swing damper MPB-1 possible
  • Protected hose routing
INDEXATOR swing damper Classic
  • High-quality steel pendulum with brake in the transverse direction
  • Bottom width: 100 mm with bolt 45 mm with nut and washer
  • Top width: 100 mm, bore 50 mm without bushing, suitable bushings available for different bolt diameters
  • Maximum static load 16,000 kg
INDEXATOR Rotator GV12-SAY-HD
  • Powerful hydraulic Rotator for pendulums with protected hose routing
  • Very durable construction - vane cell rotator with unique workmanship
  • 10,000kg max static load, 5,000kg max dynamic load
  • High torque of 2200 Nm at 250 bar
  • Low oil requirement 25 l/min
  • Favorable power-to-weight ratio
HULTDINS grapple SuperGrip I 300-S
  • High-quality Log grapple for professional use
  • Particularly strong design of the Hultdins SuperGrip grapple for strong cranes, hardwood, long wood, continuous use in heavy wood
  • Typical application: Forwarder with medium and heavy crane, Combination machine, skidder, Mini excavator 3-8 t
  • Two parallel bars made of high-strength cast iron
  • Using high-strength fine-grain steel and large bearings
  • All bolts in expander design - prevent any play
  • All bearings equipped with WIELAND bronze bushings
  • Top part extremely stable - a strong sheet goes from outside to outside
  • Claws pulled far down with thicker plates and stiffeners
  • Extremely durable hydraulic cylinder with end position cushioning with nipple protection
  • High resilience and reliability minimize downtime
  • Excellent geometry for easy bundling and high filling level
  • Movable piston rod protection (0660975) as an option, protects the piston rod even when the grapple is open
  • Very long trouble-free lifespan
View properties more
properties "GalaGrip P-300-S on crane arm extension with mounting plate for excavator attachment"
Weitere Artikelnummern:
Weight (kg): 427,484
Load capacity (kg): 4500
grapple type: Log grapple
Opening width (mm): 1480
Number of parallel bars: 2
Construction parallel bar: Cast steel
Practical cross-sectional area (m²): 0.4
Cross-sectional area lime. (m²): 0.3
Type of rotator: rotators for Log grapple
Static load max. (kg): 10,000
Dynamic load max. (kg): 5000
Torque (Nm): 2200
Top connection version: 2 tabs
Dimension connection at top: tab spacing 101 mm with 45 mm bore
Hydraulic inlet connections at the top: 4 x G 1/2
Bottom connection version: flange
Dimension connection below: flange 6x17-173 mm
Hydraulic inlet connections at the bottom: 2 x G 1/2" in the shaft axially downwards - no radial connections in the flange
Pendulum function: Brake in transverse direction
Crane tip version: 2 tabs
Bolt diameter at the crane tip (mm): 35, 40, 45
Selection of sockets for above: 35, 40, 45
Bottom connection, rotator side: pin 100 mm wide
Length pendulum bolt center to bolt center (mm): 240
Viewed

OUR KNOW-HOW. YOUR SECURITY.

We at PHILIPP are your experienced specialists for the products of the manufacturers HULTDINS, INDEXATOR, CLARK TRACKS, NORDCHAIN, MESERA and SCHWANITZ, which stand for quality, durability and economy.

For 25 years we have been the importers and expert contacts for machine builders, body manufacturers, workshops and dealers when it comes to the market-leading products from HULTDINS and INDEXATOR.

We are happy to advise you individually and always strive to offer you the best technical solution for your application. Our claim is to recommend the most economical solution for you in the long term, which is at the same time ergonomic and ecologically sensible.

Our speciality is to create custom-made products for the respective application of our customers. In cooperation with our sister company SCHWANITZ, we develop and produce innovative solutions for the forestry, agricultural and construction industries as well as for timber transport.

Our product range includes:

We stock spare parts for all products from HULTDINS, INDEXATOR, ClarkTracks, popular MESERA /LOGLIFT® forestry cranes and many more. Even if your rotator, grapple or forestry crane has been in use for a few years, we are sure to find the right spare part for you quickly.

You can rely on us! We always have your ability to work and that of your customers in mind.

The secret of our success at PHILIPP lies in our team's comprehensive expertise, personal customer advice, market-leading product selection and professional handling. Our claim is to find product solutions that help our customers get ahead.

All orders for products in stock that we receive by 2.45 p.m. are shipped the same day by UPS or freight forwarding. Thereafter, same-day express overnight shipping is available for orders placed by 4:45 p.m. to ensure that shipments reach you by 6 a.m. the next morning.<7p>

You can reach us personally by telephone from Monday to Friday from 07:00 am to 07:00 pm and on Saturdays from 09:00 am to 01:00 pm. In urgent cases, you can also reach us outside these opening hours on +49 7221 99561-0 via call forwarding. And around the clock via our online shop.

We look forward to hearing from you!


Your PHILIPP Team