Close filters
 
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!

Kinshofer rotators buy forest tools from PHILIPP

Kinshofer is a manufacturer of rotators for mobile cranes , timber cranes and excavators . Thanks to many years of experience in the development of rotators and attachments , Kinshofer produces very powerful and durable rotators that are precisely tailored to the respective application .

The "gerotor" principle

This process is based on precise starting and stopping behavior , which makes the rotator compact and effective . Thus, the gripper used when digging not turn away, but stop right, even at maximum load. Countermeasures are no longer necessary .

Special features of the Kinshofer rotators

  • Motor head made of nodular cast iron or forged heat-treated steel, depending on the application
  • Suspensions for all common cranes and excavators are available, as are various head and shaft dimensions
  • The motor heads with eye are equipped with steel beeches
  • The engine is independent of the hydraulics thanks to integrated pressure relief valves. Additional valves on the crane or excavator are not required.
  • Seals have been specially developed, synthetic oils can be used without any problems.
  • High drive and braking torque thanks to precisely manufactured parts and optimal sealing
  • The rotor unit is made of high-strength steel. The nitrided and vibratory ground surface increases the hardness and reduces wear
  • Safe absorption of compressive, tensile and bending loads thanks to the large tapered roller bearings
  • The flange shaft is forged and made in one piece from high-strength quenched and tempered steel
  • Hydraulic connections are possible horizontally and vertically
  • The rotary union is standard for a hydraulic circuit. A high flow rate is ensured by the large dimensions; the connection is possible using a standard screw-in because the flange and shaft are one part here. This means that there are no sealing levels between the two parts.
  • Rotary motors with four oil feed-throughs are also available

The product overview

Model series KM 03 S : Rotary motors with pin connection up to 3,000 kg static load

Key facts:

  • Operating pressure: 32 MPA (320 bar)
  • Recommended liter output: 25 - 60 l / min
  • Connections hydraulic inlet: G 3/8 "
  • Connections hydraulic output: G 1/4 "
  • The "KM 03 S" can be used up to a static load of 3,000 kg. The torque is 450 Nm at 320 bar.

Model series KM 04 S : Rotary motors with pin connection up to 4,500 kg load

The following models are available with an ascending wave average:

Model series KM 04 F : Rotary motors with flange connection up to 4,500 kg load capacity

  • Hole pattern for flange 140 mm
  • Connection dimension above 84x30 mm
  • Torque between 850 and 1,000 Nm
  • Weight between 26 kg and 40 kg
  • Operating pressure turning max 370 bar
  • Liter output turning max 40 l / min
  • Liter output rotary union max. 75 l / min

Model series KM 06 F : Rotary motors with flange connection up to 6,000 kg load capacity

Model KM 06 F173-35-4

  • Hole pattern flange diameter 173 mm
  • Connection dimension above 81x35 mm
  • Torque 1,000 Nm
  • Hydraulic connections G 1/2 "
  • Operating pressure turning max 370 bar
  • Liter output turning max 40 l / min
  • Liter output rotary union max. 75 l / min

Model series KM 10 F : Rotary motors with flange connection up to 10,000 kg load

  • Hole pattern diameter 173 mm
  • Available with connection dimensions above 81x35 mm or 100x45 mm
  • Torque 2,000 Nm
  • Weight between 62 kg and 68 kg
  • Operating pressure turning max 370 bar
  • Liter output turning max 50 l / min
  • Liter output rotary union max. 75 l / min

equipment

Of course, we also have access to the necessary accessories, such as suspensions, hose protectors, reducers, quick-change devices and connecting hoses from Kinshofer. If you need a part here and want to buy it, please do not hesitate to contact us !

Kinshofer is a manufacturer of rotators for mobile cranes , timber cranes and excavators . Thanks to many years of experience in the development of rotators and attachments... read more »
Close window
Kinshofer rotators buy forest tools from PHILIPP

Kinshofer is a manufacturer of rotators for mobile cranes , timber cranes and excavators . Thanks to many years of experience in the development of rotators and attachments , Kinshofer produces very powerful and durable rotators that are precisely tailored to the respective application .

The "gerotor" principle

This process is based on precise starting and stopping behavior , which makes the rotator compact and effective . Thus, the gripper used when digging not turn away, but stop right, even at maximum load. Countermeasures are no longer necessary .

Special features of the Kinshofer rotators

  • Motor head made of nodular cast iron or forged heat-treated steel, depending on the application
  • Suspensions for all common cranes and excavators are available, as are various head and shaft dimensions
  • The motor heads with eye are equipped with steel beeches
  • The engine is independent of the hydraulics thanks to integrated pressure relief valves. Additional valves on the crane or excavator are not required.
  • Seals have been specially developed, synthetic oils can be used without any problems.
  • High drive and braking torque thanks to precisely manufactured parts and optimal sealing
  • The rotor unit is made of high-strength steel. The nitrided and vibratory ground surface increases the hardness and reduces wear
  • Safe absorption of compressive, tensile and bending loads thanks to the large tapered roller bearings
  • The flange shaft is forged and made in one piece from high-strength quenched and tempered steel
  • Hydraulic connections are possible horizontally and vertically
  • The rotary union is standard for a hydraulic circuit. A high flow rate is ensured by the large dimensions; the connection is possible using a standard screw-in because the flange and shaft are one part here. This means that there are no sealing levels between the two parts.
  • Rotary motors with four oil feed-throughs are also available

The product overview

Model series KM 03 S : Rotary motors with pin connection up to 3,000 kg static load

Key facts:

  • Operating pressure: 32 MPA (320 bar)
  • Recommended liter output: 25 - 60 l / min
  • Connections hydraulic inlet: G 3/8 "
  • Connections hydraulic output: G 1/4 "
  • The "KM 03 S" can be used up to a static load of 3,000 kg. The torque is 450 Nm at 320 bar.

Model series KM 04 S : Rotary motors with pin connection up to 4,500 kg load

The following models are available with an ascending wave average:

Model series KM 04 F : Rotary motors with flange connection up to 4,500 kg load capacity

  • Hole pattern for flange 140 mm
  • Connection dimension above 84x30 mm
  • Torque between 850 and 1,000 Nm
  • Weight between 26 kg and 40 kg
  • Operating pressure turning max 370 bar
  • Liter output turning max 40 l / min
  • Liter output rotary union max. 75 l / min

Model series KM 06 F : Rotary motors with flange connection up to 6,000 kg load capacity

Model KM 06 F173-35-4

  • Hole pattern flange diameter 173 mm
  • Connection dimension above 81x35 mm
  • Torque 1,000 Nm
  • Hydraulic connections G 1/2 "
  • Operating pressure turning max 370 bar
  • Liter output turning max 40 l / min
  • Liter output rotary union max. 75 l / min

Model series KM 10 F : Rotary motors with flange connection up to 10,000 kg load

  • Hole pattern diameter 173 mm
  • Available with connection dimensions above 81x35 mm or 100x45 mm
  • Torque 2,000 Nm
  • Weight between 62 kg and 68 kg
  • Operating pressure turning max 370 bar
  • Liter output turning max 50 l / min
  • Liter output rotary union max. 75 l / min

equipment

Of course, we also have access to the necessary accessories, such as suspensions, hose protectors, reducers, quick-change devices and connecting hoses from Kinshofer. If you need a part here and want to buy it, please do not hesitate to contact us !

Viewed

OUR KNOW-HOW. YOUR SECURITY.

We at PHILIPP ForstWerkzeuge are your experienced specialists for the products of the brands HULTDINS, INDEXATOR, CLARK TRACKS and NORDCHAIN .

For more than 20 years we have been the expert contact for machine builders, body manufacturers and workshops when it comes to the market leading products from HULTDINS and INDEXATOR .

We would be happy to advise you individually and strive to always offer you the best technical solution for your application . Our aim is to recommend the most economical long-term solution for you , which is ergonomically and ecologically sensible at the same time.

Our product range includes:

We ensure the supply of spare parts for our entire product range - even many years after the purchase.

We stock all the important spare parts for HULTDINS and INDEXATOR , as well as many spare parts that are only needed occasionally. We always keep an eye on your ability to work and that of your customers. You can rely on us!

All orders that we receive until 3 p.m. for products in stock are dispatched the same day by UPS or forwarding agent. Then same day if you order by 4:45 p.m. by express.

Even if your last order was several years ago, we are and will remain your contact person and will be happy to provide you with comprehensive support. At PHILIPP ForstWerkzeuge we stand for individual advice , specialist knowledge, accessibility and the availability of our products .

You can reach us personally by phone from Monday to Friday from 7 a.m. to 7 p.m., on Saturdays from 9 a.m. to 1 p.m. and in urgent cases also by diverting calls outside of these opening hours.