Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
2 From 2
2 From 2

Buy INDEXATOR H hydraulic rotators for harvesters at PHILIPP ForstWerkzeuge

INDEXATOR H rotators equipped with four stable tabs are used on light , medium-sized Harvester heads heads and strong wheeled harvesters , e.g. for handling large logs or for thinning . They represent the current state of the art for rotators for Harvester heads.

The combination with an MPB swing damper from INDEXATOR increases the working speed in the thinning and the maintenance is improved. The vibration loads on the machine are also reduced . The high-performance , powerful and wear -resistant H rotators are the ideal equipment for mechanical wood harvesting.

The program of H rotators ranges from the light INDEXATOR H101 with 6,000 kg maximum static load and 1,900 Nm torque to the INDEXATOR H182 with 16,000 kg maximum static load and 3,300 Nm torque .

HX rotators

The new class of harvester rotators - the INDEXATOR HX models.

The connection dimensions of the H rotators have been adopted, but the concept is completely new!

Compared to previous harvester rotators, the INDEXATOR HX rotators have a much larger bearing that absorbs radial and axial forces in both pulling and pushing directions . The drive is decoupled from the bearing . This makes maintenance easier . The downward connection to the Harvester head head can also absorb much greater forces. The bolt circle has remained the same. For the attachment of the rotator to the tilt frame, the HX rotator has 10 holes with an M16 thread instead of the previous 6 holes. The holes are part of the housing. This reduces the maintenance effort and increases operational reliability .

The INDEXATOR HX rotators are the new industry standard for harvester rotators!

Which INDEXATOR H rotators do we have in our range?

H 101 rotator

  • Maximum static load: 6,000 kg
  • Maximum dynamic load: 2,500 kg
  • Torque: 1,900 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Wear-resistant and service-friendly
  • Bottom mount: flange
  • Top mount: 4 tabs
  • Powerful upper mount for MPB swing damper
  • Use: thinning, easier end-use

H 121 rotator

  • Maximum static load: 10,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 2,200 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Wear-resistant and service-friendly
  • Top mount: 4 tabs
  • Bottom mount: flange
  • Powerful upper mount for MPB-1 swing damper
  • Use: light harvesters

H 122 rotator

  • Maximum static load: 10,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 2,200 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Wear-resistant and service-friendly
  • Top mount: 4 tabs
  • Bottom mount: flange
  • Powerful upper mount for MPB-2 swing damper
  • Use: light and medium-sized harvesters

H 152 rotator

  • Maximum static load: 10,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 2,200 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Top mount: 4 tabs
  • Bottom mount: flange
  • More radial screws hold the case together
  • Higher flange ensures more stability
  • Powerful upper mount for MPB swing damper
  • Use: medium harvesters

 

H 172 rotator

  • Maximum static load: 16,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 3,300 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Wear-resistant and service-friendly
  • Top mount: 4 tabs
  • Bottom mount: flange
  • More radial screws hold the case together
  • Higher flange ensures more stability
  • Powerful upper mount for MPB swing damper
  • Use: medium and heavy harvesters

H 182 rotator

  • Maximum static load: 16,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 3,300 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Wear-resistant and service-friendly
  • Bottom mount: flange
  • More radial screws hold the case together
  • Higher flange ensures more stability
  • Longer storage of the shaft
  • Powerful upper mount for MPB-2 swing damper
  • Use: strong harvesters

HX 30-LS rotator

  • Maximum static load: 16,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 3,300 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Connections above and below interchangeable with H122 to H182
  • Bottom mount: flange
  • Powerful upper mount for MPB-2 swing damper
  • Use: medium and large wheel harvesters, excavator harvesters

Contact us for individual advice on harvester rotators. Our employees have a high level of specialist knowledge and always have the right solution at hand.

INDEXATOR H rotators equipped with four stable tabs are used on light , medium-sized Harvester heads heads and strong wheeled harvesters , e.g. for handling large logs or for... read more »
Close window
Buy INDEXATOR H hydraulic rotators for harvesters at PHILIPP ForstWerkzeuge

INDEXATOR H rotators equipped with four stable tabs are used on light , medium-sized Harvester heads heads and strong wheeled harvesters , e.g. for handling large logs or for thinning . They represent the current state of the art for rotators for Harvester heads.

The combination with an MPB swing damper from INDEXATOR increases the working speed in the thinning and the maintenance is improved. The vibration loads on the machine are also reduced . The high-performance , powerful and wear -resistant H rotators are the ideal equipment for mechanical wood harvesting.

The program of H rotators ranges from the light INDEXATOR H101 with 6,000 kg maximum static load and 1,900 Nm torque to the INDEXATOR H182 with 16,000 kg maximum static load and 3,300 Nm torque .

HX rotators

The new class of harvester rotators - the INDEXATOR HX models.

The connection dimensions of the H rotators have been adopted, but the concept is completely new!

Compared to previous harvester rotators, the INDEXATOR HX rotators have a much larger bearing that absorbs radial and axial forces in both pulling and pushing directions . The drive is decoupled from the bearing . This makes maintenance easier . The downward connection to the Harvester head head can also absorb much greater forces. The bolt circle has remained the same. For the attachment of the rotator to the tilt frame, the HX rotator has 10 holes with an M16 thread instead of the previous 6 holes. The holes are part of the housing. This reduces the maintenance effort and increases operational reliability .

The INDEXATOR HX rotators are the new industry standard for harvester rotators!

Which INDEXATOR H rotators do we have in our range?

H 101 rotator

  • Maximum static load: 6,000 kg
  • Maximum dynamic load: 2,500 kg
  • Torque: 1,900 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Wear-resistant and service-friendly
  • Bottom mount: flange
  • Top mount: 4 tabs
  • Powerful upper mount for MPB swing damper
  • Use: thinning, easier end-use

H 121 rotator

  • Maximum static load: 10,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 2,200 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Wear-resistant and service-friendly
  • Top mount: 4 tabs
  • Bottom mount: flange
  • Powerful upper mount for MPB-1 swing damper
  • Use: light harvesters

H 122 rotator

  • Maximum static load: 10,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 2,200 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Wear-resistant and service-friendly
  • Top mount: 4 tabs
  • Bottom mount: flange
  • Powerful upper mount for MPB-2 swing damper
  • Use: light and medium-sized harvesters

H 152 rotator

  • Maximum static load: 10,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 2,200 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Top mount: 4 tabs
  • Bottom mount: flange
  • More radial screws hold the case together
  • Higher flange ensures more stability
  • Powerful upper mount for MPB swing damper
  • Use: medium harvesters

 

H 172 rotator

  • Maximum static load: 16,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 3,300 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Wear-resistant and service-friendly
  • Top mount: 4 tabs
  • Bottom mount: flange
  • More radial screws hold the case together
  • Higher flange ensures more stability
  • Powerful upper mount for MPB swing damper
  • Use: medium and heavy harvesters

H 182 rotator

  • Maximum static load: 16,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 3,300 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Wear-resistant and service-friendly
  • Bottom mount: flange
  • More radial screws hold the case together
  • Higher flange ensures more stability
  • Longer storage of the shaft
  • Powerful upper mount for MPB-2 swing damper
  • Use: strong harvesters

HX 30-LS rotator

  • Maximum static load: 16,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 3,300 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Connections above and below interchangeable with H122 to H182
  • Bottom mount: flange
  • Powerful upper mount for MPB-2 swing damper
  • Use: medium and large wheel harvesters, excavator harvesters

Contact us for individual advice on harvester rotators. Our employees have a high level of specialist knowledge and always have the right solution at hand.

Viewed

OUR KNOW-HOW. YOUR SECURITY.

We at PHILIPP are your experienced specialists for the products of the manufacturers HULTDINS, INDEXATOR, CLARK TRACKS, NORDCHAIN, MESERA and SCHWANITZ, which stand for quality, durability and economy.

For 25 years we have been the importers and expert contacts for machine builders, body manufacturers, workshops and dealers when it comes to the market-leading products from HULTDINS and INDEXATOR.

We are happy to advise you individually and always strive to offer you the best technical solution for your application. Our claim is to recommend the most economical solution for you in the long term, which is at the same time ergonomic and ecologically sensible.

Our speciality is to create custom-made products for the respective application of our customers. In cooperation with our sister company SCHWANITZ, we develop and produce innovative solutions for the forestry, agricultural and construction industries as well as for timber transport.

Our product range includes:

We stock spare parts for all products from HULTDINS, INDEXATOR, ClarkTracks, popular MESERA /LOGLIFT® forestry cranes and many more. Even if your rotator, grapple or forestry crane has been in use for a few years, we are sure to find the right spare part for you quickly.

You can rely on us! We always have your ability to work and that of your customers in mind.

The secret of our success at PHILIPP lies in our team's comprehensive expertise, personal customer advice, market-leading product selection and professional handling. Our claim is to find product solutions that help our customers get ahead.

All orders for products in stock that we receive by 2.45 p.m. are shipped the same day by UPS or freight forwarding. Thereafter, same-day express overnight shipping is available for orders placed by 4:45 p.m. to ensure that shipments reach you by 6 a.m. the next morning.<7p>

You can reach us personally by telephone from Monday to Friday from 07:00 am to 07:00 pm and on Saturdays from 09:00 am to 01:00 pm. In urgent cases, you can also reach us outside these opening hours on +49 7221 99561-0 via call forwarding. And around the clock via our online shop.

We look forward to hearing from you!


Your PHILIPP Team