Close filters
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 2
No results were found for the filter!
1 From 2

Buy INDEXATOR H hydraulic rotators for harvesters at PHILIPP ForstWerkzeuge

INDEXATOR H rotators equipped with four stable tabs are used on light , medium-sized Harvester heads heads and strong wheeled harvesters , e.g. for handling large logs or for thinning . They represent the current state of the art for rotators for Harvester heads.

The combination with an MPB swing damper from INDEXATOR increases the working speed in the thinning and the maintenance is improved. The vibration loads on the machine are also reduced . The high-performance , powerful and wear -resistant H rotators are the ideal equipment for mechanical wood harvesting.

The program of H rotators ranges from the light INDEXATOR H101 with 6,000 kg maximum static load and 1,900 Nm torque to the INDEXATOR H182 with 16,000 kg maximum static load and 3,300 Nm torque .

HX rotators

The new class of harvester rotators - the INDEXATOR HX models.

The connection dimensions of the H rotators have been adopted, but the concept is completely new!

Compared to previous harvester rotators, the INDEXATOR HX rotators have a much larger bearing that absorbs radial and axial forces in both pulling and pushing directions . The drive is decoupled from the bearing . This makes maintenance easier . The downward connection to the Harvester head head can also absorb much greater forces. The bolt circle has remained the same. For the attachment of the rotator to the tilt frame, the HX rotator has 10 holes with an M16 thread instead of the previous 6 holes. The holes are part of the housing. This reduces the maintenance effort and increases operational reliability .

The INDEXATOR HX rotators are the new industry standard for harvester rotators!

Which INDEXATOR H rotators do we have in our range?

H 101 rotator

  • Maximum static load: 6,000 kg
  • Maximum dynamic load: 2,500 kg
  • Torque: 1,900 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Wear-resistant and service-friendly
  • Bottom mount: flange
  • Top mount: 4 tabs
  • Powerful upper mount for MPB swing damper
  • Use: thinning, easier end-use

H 121 rotator

  • Maximum static load: 10,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 2,200 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Wear-resistant and service-friendly
  • Top mount: 4 tabs
  • Bottom mount: flange
  • Powerful upper mount for MPB-1 swing damper
  • Use: light harvesters

H 122 rotator

  • Maximum static load: 10,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 2,200 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Wear-resistant and service-friendly
  • Top mount: 4 tabs
  • Bottom mount: flange
  • Powerful upper mount for MPB-2 swing damper
  • Use: light and medium-sized harvesters

H 152 rotator

  • Maximum static load: 10,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 2,200 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Top mount: 4 tabs
  • Bottom mount: flange
  • More radial screws hold the case together
  • Higher flange ensures more stability
  • Powerful upper mount for MPB swing damper
  • Use: medium harvesters

 

H 172 rotator

  • Maximum static load: 16,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 3,300 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Wear-resistant and service-friendly
  • Top mount: 4 tabs
  • Bottom mount: flange
  • More radial screws hold the case together
  • Higher flange ensures more stability
  • Powerful upper mount for MPB swing damper
  • Use: medium and heavy harvesters

H 182 rotator

  • Maximum static load: 16,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 3,300 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Wear-resistant and service-friendly
  • Bottom mount: flange
  • More radial screws hold the case together
  • Higher flange ensures more stability
  • Longer storage of the shaft
  • Powerful upper mount for MPB-2 swing damper
  • Use: strong harvesters

HX 30-LS rotator

  • Maximum static load: 16,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 3,300 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Connections above and below interchangeable with H122 to H182
  • Bottom mount: flange
  • Powerful upper mount for MPB-2 swing damper
  • Use: medium and large wheel harvesters, excavator harvesters

Contact us for individual advice on harvester rotators. Our employees have a high level of specialist knowledge and always have the right solution at hand.

INDEXATOR H rotators equipped with four stable tabs are used on light , medium-sized Harvester heads heads and strong wheeled harvesters , e.g. for handling large logs or for... read more »
Close window
Buy INDEXATOR H hydraulic rotators for harvesters at PHILIPP ForstWerkzeuge

INDEXATOR H rotators equipped with four stable tabs are used on light , medium-sized Harvester heads heads and strong wheeled harvesters , e.g. for handling large logs or for thinning . They represent the current state of the art for rotators for Harvester heads.

The combination with an MPB swing damper from INDEXATOR increases the working speed in the thinning and the maintenance is improved. The vibration loads on the machine are also reduced . The high-performance , powerful and wear -resistant H rotators are the ideal equipment for mechanical wood harvesting.

The program of H rotators ranges from the light INDEXATOR H101 with 6,000 kg maximum static load and 1,900 Nm torque to the INDEXATOR H182 with 16,000 kg maximum static load and 3,300 Nm torque .

HX rotators

The new class of harvester rotators - the INDEXATOR HX models.

The connection dimensions of the H rotators have been adopted, but the concept is completely new!

Compared to previous harvester rotators, the INDEXATOR HX rotators have a much larger bearing that absorbs radial and axial forces in both pulling and pushing directions . The drive is decoupled from the bearing . This makes maintenance easier . The downward connection to the Harvester head head can also absorb much greater forces. The bolt circle has remained the same. For the attachment of the rotator to the tilt frame, the HX rotator has 10 holes with an M16 thread instead of the previous 6 holes. The holes are part of the housing. This reduces the maintenance effort and increases operational reliability .

The INDEXATOR HX rotators are the new industry standard for harvester rotators!

Which INDEXATOR H rotators do we have in our range?

H 101 rotator

  • Maximum static load: 6,000 kg
  • Maximum dynamic load: 2,500 kg
  • Torque: 1,900 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Wear-resistant and service-friendly
  • Bottom mount: flange
  • Top mount: 4 tabs
  • Powerful upper mount for MPB swing damper
  • Use: thinning, easier end-use

H 121 rotator

  • Maximum static load: 10,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 2,200 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Wear-resistant and service-friendly
  • Top mount: 4 tabs
  • Bottom mount: flange
  • Powerful upper mount for MPB-1 swing damper
  • Use: light harvesters

H 122 rotator

  • Maximum static load: 10,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 2,200 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Wear-resistant and service-friendly
  • Top mount: 4 tabs
  • Bottom mount: flange
  • Powerful upper mount for MPB-2 swing damper
  • Use: light and medium-sized harvesters

H 152 rotator

  • Maximum static load: 10,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 2,200 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Top mount: 4 tabs
  • Bottom mount: flange
  • More radial screws hold the case together
  • Higher flange ensures more stability
  • Powerful upper mount for MPB swing damper
  • Use: medium harvesters

 

H 172 rotator

  • Maximum static load: 16,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 3,300 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Wear-resistant and service-friendly
  • Top mount: 4 tabs
  • Bottom mount: flange
  • More radial screws hold the case together
  • Higher flange ensures more stability
  • Powerful upper mount for MPB swing damper
  • Use: medium and heavy harvesters

H 182 rotator

  • Maximum static load: 16,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 3,300 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Wear-resistant and service-friendly
  • Bottom mount: flange
  • More radial screws hold the case together
  • Higher flange ensures more stability
  • Longer storage of the shaft
  • Powerful upper mount for MPB-2 swing damper
  • Use: strong harvesters

HX 30-LS rotator

  • Maximum static load: 16,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 3,300 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Connections above and below interchangeable with H122 to H182
  • Bottom mount: flange
  • Powerful upper mount for MPB-2 swing damper
  • Use: medium and large wheel harvesters, excavator harvesters

Contact us for individual advice on harvester rotators. Our employees have a high level of specialist knowledge and always have the right solution at hand.

Viewed

OUR KNOW-HOW. YOUR SECURITY.

We at PHILIPP ForstWerkzeuge are your experienced specialists for the products of the brands HULTDINS, INDEXATOR, CLARK TRACKS and NORDCHAIN .

For more than 20 years we have been the expert contact for machine builders, body manufacturers and workshops when it comes to the market leading products from HULTDINS and INDEXATOR .

We would be happy to advise you individually and strive to always offer you the best technical solution for your application . Our aim is to recommend the most economical long-term solution for you , which is ergonomically and ecologically sensible at the same time.

Our product range includes:

We ensure the supply of spare parts for our entire product range - even many years after the purchase.

We stock all the important spare parts for HULTDINS and INDEXATOR , as well as many spare parts that are only needed occasionally. We always keep an eye on your ability to work and that of your customers. You can rely on us!

All orders that we receive until 3 p.m. for products in stock are dispatched the same day by UPS or forwarding agent. Then same day if you order by 4:45 p.m. by express.

Even if your last order was several years ago, we are and will remain your contact person and will be happy to provide you with comprehensive support. At PHILIPP ForstWerkzeuge we stand for individual advice , specialist knowledge, accessibility and the availability of our products .

You can reach us personally by phone from Monday to Friday from 7 a.m. to 7 p.m., on Saturdays from 9 a.m. to 1 p.m. and in urgent cases also by diverting calls outside of these opening hours.