Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 3
No results were found for the filter!
1 From 3

Buy INDEXATOR AV and H hydraulic rotators for harvesters from PHILIPP ForstWerkzeuge

AV rotators and H rotators are suitable for attachment to harvester heads.

What is special about the INDEXATOR AV rotators ?

The AV rotators have been the standard for harvesters in Europe for many years. Mostly in the S version with 100 mm tab spacing and 45 mm bolts.

There are sizes AV4 , AV12 , AV14-S and AV17-S . The static loads range from 4,500 kg to 16,000 kg and the torques from 1,150 Nm to 3,300 Nm .

What is special about the INDEXATOR H rotators ?

The H rotators from INDEXATOR are the current state of the art for rotators for Harvester heads heads. The rotator head with 4 tabs brackets is prepared for operation with the most powerful swing damper, the MPB brake from INDEXATOR. The strong swing damper accelerates the thinning work and improves maintenance , while vibration loads on the machine are reduced at the same time.

The program of H rotators ranges from the light INDEXATOR H101 with 6,000 kg maximum static load and 1,900 Nm torque to the INDEXATOR H182 with 16,000 kg maximum static load and 3,300 Nm torque .

HX rotators

The continuous increase in performance of the Harvester heads and the available hydraulic power have led to the development of a new class of harvester rotators - the INDEXATOR HX models .

The connection dimensions of the H rotators have been adopted, but the concept is completely new !

While the tensile load was previously absorbed by a needle bearing and the radial load by a plain bearing, the INDEXATOR HX rotators have a much larger bearing that absorbs radial and axial forces in both tensile and compressive directions. The drive is decoupled from the bearing, which makes maintenance easier . The downward connection to the Harvester head head can also absorb much greater forces . The hole circle has remained the same , what is new: There are 10 holes with an M16 thread instead of 6 holes with which the rotator can be attached to the tilt frame. The bores are part of the housing , which also reduces maintenance costs and increases operational reliability .

The INDEXATOR HX rotators are the new industry standard for harvester rotators!

Contact us for individual advice on harvester rotators. Our employees have a high level of specialist knowledge and always have the right solution at hand.

AV rotators and H rotators are suitable for attachment to harvester heads. What is special about the INDEXATOR AV rotators ? The AV rotators have been the standard for... read more »
Close window
Buy INDEXATOR AV and H hydraulic rotators for harvesters from PHILIPP ForstWerkzeuge

AV rotators and H rotators are suitable for attachment to harvester heads.

What is special about the INDEXATOR AV rotators ?

The AV rotators have been the standard for harvesters in Europe for many years. Mostly in the S version with 100 mm tab spacing and 45 mm bolts.

There are sizes AV4 , AV12 , AV14-S and AV17-S . The static loads range from 4,500 kg to 16,000 kg and the torques from 1,150 Nm to 3,300 Nm .

What is special about the INDEXATOR H rotators ?

The H rotators from INDEXATOR are the current state of the art for rotators for Harvester heads heads. The rotator head with 4 tabs brackets is prepared for operation with the most powerful swing damper, the MPB brake from INDEXATOR. The strong swing damper accelerates the thinning work and improves maintenance , while vibration loads on the machine are reduced at the same time.

The program of H rotators ranges from the light INDEXATOR H101 with 6,000 kg maximum static load and 1,900 Nm torque to the INDEXATOR H182 with 16,000 kg maximum static load and 3,300 Nm torque .

HX rotators

The continuous increase in performance of the Harvester heads and the available hydraulic power have led to the development of a new class of harvester rotators - the INDEXATOR HX models .

The connection dimensions of the H rotators have been adopted, but the concept is completely new !

While the tensile load was previously absorbed by a needle bearing and the radial load by a plain bearing, the INDEXATOR HX rotators have a much larger bearing that absorbs radial and axial forces in both tensile and compressive directions. The drive is decoupled from the bearing, which makes maintenance easier . The downward connection to the Harvester head head can also absorb much greater forces . The hole circle has remained the same , what is new: There are 10 holes with an M16 thread instead of 6 holes with which the rotator can be attached to the tilt frame. The bores are part of the housing , which also reduces maintenance costs and increases operational reliability .

The INDEXATOR HX rotators are the new industry standard for harvester rotators!

Contact us for individual advice on harvester rotators. Our employees have a high level of specialist knowledge and always have the right solution at hand.

Viewed

OUR KNOW-HOW. YOUR SECURITY.

We at PHILIPP are your experienced specialists for the products of the manufacturers HULTDINS, INDEXATOR, CLARK TRACKS, NORDCHAIN, MESERA and SCHWANITZ, which stand for quality, durability and economy.

For 25 years we have been the importers and expert contacts for machine builders, body manufacturers, workshops and dealers when it comes to the market-leading products from HULTDINS and INDEXATOR.

We are happy to advise you individually and always strive to offer you the best technical solution for your application. Our claim is to recommend the most economical solution for you in the long term, which is at the same time ergonomic and ecologically sensible.

Our speciality is to create custom-made products for the respective application of our customers. In cooperation with our sister company SCHWANITZ, we develop and produce innovative solutions for the forestry, agricultural and construction industries as well as for timber transport.

Our product range includes:

We stock spare parts for all products from HULTDINS, INDEXATOR, ClarkTracks, popular MESERA /LOGLIFT® forestry cranes and many more. Even if your rotator, grapple or forestry crane has been in use for a few years, we are sure to find the right spare part for you quickly.

You can rely on us! We always have your ability to work and that of your customers in mind.

The secret of our success at PHILIPP lies in our team's comprehensive expertise, personal customer advice, market-leading product selection and professional handling. Our claim is to find product solutions that help our customers get ahead.

All orders for products in stock that we receive by 2.45 p.m. are shipped the same day by UPS or freight forwarding. Thereafter, same-day express overnight shipping is available for orders placed by 4:45 p.m. to ensure that shipments reach you by 6 a.m. the next morning.<7p>

You can reach us personally by telephone from Monday to Friday from 07:00 am to 07:00 pm and on Saturdays from 09:00 am to 01:00 pm. In urgent cases, you can also reach us outside these opening hours on +49 7221 99561-0 via call forwarding. And around the clock via our online shop.

We look forward to hearing from you!


Your PHILIPP Team