Close filters
 
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!

Buy XR 400 compact rotators from PHILIPP ForstWerkzeuge

INDEXATOR XR 400 compact rotators are the long-lasting solution for pendulum suspension on material handling machines from 30 t to 50 t operating weight and Safe Work Loads (SWL) for e.g. Timber grapples of around 10,000 kg in continuous use . XR 400 rotators are also suitable for sorting , multipurpose and demolition grabs for permanent attachment to Excavator from 16 t to 25 t operating weight . Like all XR rotators , the XR 400 is characterized by its modular design with a decoupled drive and large slewing ring bearing.

The forces are conducted outside via the stable housing and the large bearing . The motor and drive are spared the loads and twisting . Motor and bearing can be exchanged independently of each other. This ensures low costs and the best sustainability . XR rotators are not afraid of water, they are often used for dredging .

There are a number of innovative versions of the XR 400 that open up completely new possibilities. The version XR 400-HAT-P-AV-X2-C-M24 is outstanding, with the powerful motor of the XR600, a power feedthrough for eg magnet and data cable, 2 rotary feedthroughs ¾ “for eg connecting a saw and a channel for the connection a central lubrication system.

For this XR 400 compact rotator, Oilquick has developed a quick coupler so that material handlers can switch between magnet and scrap grab in seconds .

Which versions of the XR 400 compact rotator are there?

  • XR 400
    • Max static load: 55,000 kg
    • Max dynamic load: 20,000 kg
    • Max.radial load: 14,000 kg
    • Oil requirement: 35 l / min
    • Torque: 4,100 Nm
    • Top mount: flange with bore and thread (bolt circle 12xM20-265 mm)
    • Mount below: bolt circle 30x14-450 mm

  • XR 400 C: With additional duct with connection M 10x1.0
  • XR 400 I : With mount for pendulum above, suitable for IR22
  • XR 400 P : With central hole for power feed-through
  • XR 400 T : With flange below according to Thumm 615H, 8x22-340 mm
  • XR 400 HT P AV: Motor with 7,000 Nm and hole for cables
  • XR 400 HT X2 C M20: Motor with 7,000 Nm and 2 oil channels ¾ “, lubrication channel M10x1.0, thread M24 at the top
  • XR 400 HT X2 C M24: Motor with 7,000 Nm, 2 oil channels ¾ “, lubrication channel M10x1.0, thread M20 on top
  • XR 400 HT P-X2 C M24: Motor with 7,000 Nm, hole for current feed-through, 2 oil channels ¾ “, lubrication channel M10x1.0; M20 thread on top

The right oil distributor can be ordered from our online shop:

Suitable for XR 400 / XR 400 I / XR 400 T:

Suitable for XR 400 C:

  • Oil distributor 116 A 2xG1 C

Suitable for XR 400 P:

We would be happy to advise you on the selection of the compact rotator from INDEXATOR that is right for your application.

Original spare parts for all INDEXATOR rotators can be found in our online shop.

INDEXATOR XR 400 compact rotators are the long-lasting solution for pendulum suspension on material handling machines from 30 t to 50 t operating weight and Safe Work Loads (SWL)... read more »
Close window
Buy XR 400 compact rotators from PHILIPP ForstWerkzeuge

INDEXATOR XR 400 compact rotators are the long-lasting solution for pendulum suspension on material handling machines from 30 t to 50 t operating weight and Safe Work Loads (SWL) for e.g. Timber grapples of around 10,000 kg in continuous use . XR 400 rotators are also suitable for sorting , multipurpose and demolition grabs for permanent attachment to Excavator from 16 t to 25 t operating weight . Like all XR rotators , the XR 400 is characterized by its modular design with a decoupled drive and large slewing ring bearing.

The forces are conducted outside via the stable housing and the large bearing . The motor and drive are spared the loads and twisting . Motor and bearing can be exchanged independently of each other. This ensures low costs and the best sustainability . XR rotators are not afraid of water, they are often used for dredging .

There are a number of innovative versions of the XR 400 that open up completely new possibilities. The version XR 400-HAT-P-AV-X2-C-M24 is outstanding, with the powerful motor of the XR600, a power feedthrough for eg magnet and data cable, 2 rotary feedthroughs ¾ “for eg connecting a saw and a channel for the connection a central lubrication system.

For this XR 400 compact rotator, Oilquick has developed a quick coupler so that material handlers can switch between magnet and scrap grab in seconds .

Which versions of the XR 400 compact rotator are there?

  • XR 400
    • Max static load: 55,000 kg
    • Max dynamic load: 20,000 kg
    • Max.radial load: 14,000 kg
    • Oil requirement: 35 l / min
    • Torque: 4,100 Nm
    • Top mount: flange with bore and thread (bolt circle 12xM20-265 mm)
    • Mount below: bolt circle 30x14-450 mm

  • XR 400 C: With additional duct with connection M 10x1.0
  • XR 400 I : With mount for pendulum above, suitable for IR22
  • XR 400 P : With central hole for power feed-through
  • XR 400 T : With flange below according to Thumm 615H, 8x22-340 mm
  • XR 400 HT P AV: Motor with 7,000 Nm and hole for cables
  • XR 400 HT X2 C M20: Motor with 7,000 Nm and 2 oil channels ¾ “, lubrication channel M10x1.0, thread M24 at the top
  • XR 400 HT X2 C M24: Motor with 7,000 Nm, 2 oil channels ¾ “, lubrication channel M10x1.0, thread M20 on top
  • XR 400 HT P-X2 C M24: Motor with 7,000 Nm, hole for current feed-through, 2 oil channels ¾ “, lubrication channel M10x1.0; M20 thread on top

The right oil distributor can be ordered from our online shop:

Suitable for XR 400 / XR 400 I / XR 400 T:

Suitable for XR 400 C:

  • Oil distributor 116 A 2xG1 C

Suitable for XR 400 P:

We would be happy to advise you on the selection of the compact rotator from INDEXATOR that is right for your application.

Original spare parts for all INDEXATOR rotators can be found in our online shop.

Viewed

OUR KNOW-HOW. YOUR SECURITY.

We at PHILIPP ForstWerkzeuge are your experienced specialists for the products of the brands HULTDINS, INDEXATOR, CLARK TRACKS and NORDCHAIN .

For more than 20 years we have been the expert contact for machine builders, body manufacturers and workshops when it comes to the market leading products from HULTDINS and INDEXATOR .

We would be happy to advise you individually and strive to always offer you the best technical solution for your application . Our aim is to recommend the most economical long-term solution for you , which is ergonomically and ecologically sensible at the same time.

Our product range includes:

We ensure the supply of spare parts for our entire product range - even many years after the purchase.

We stock all the important spare parts for HULTDINS and INDEXATOR , as well as many spare parts that are only needed occasionally. We always keep an eye on your ability to work and that of your customers. You can rely on us!

All orders that we receive until 3 p.m. for products in stock are dispatched the same day by UPS or forwarding agent. Then same day if you order by 4:45 p.m. by express.

Even if your last order was several years ago, we are and will remain your contact person and will be happy to provide you with comprehensive support. At PHILIPP ForstWerkzeuge we stand for individual advice , specialist knowledge, accessibility and the availability of our products .

You can reach us personally by phone from Monday to Friday from 7 a.m. to 7 p.m., on Saturdays from 9 a.m. to 1 p.m. and in urgent cases also by diverting calls outside of these opening hours.