Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 2
No results were found for the filter!
1 From 2

Buy hydraulic compact rotators from PHILIPP ForstWerkzeuge

The series of XR rotators includes the compact rotators from INDEXATOR.

What is special about the INDEXATOR XR rotators?

The XR rotators are designed for attachment to material handlers and excavators . The range includes models with maximum static loads from 30,000 kg to 85,000 kg and torques from 3,000 Nm to 7,000 Nm . They are suitable for pendulum suspension and permanent attachment.

The XR series from INDEXATOR is permanently or gimbally attached to material handling machines and Excavator . The structure of these particularly robust rotators is modular . The motor is floating in the housing , which means that torsion and loads are kept away from the motor . The entire construction of the XR rotators is designed to transfer the loads via the outer stable housing and the large slewing crane bearings .

The powerful vane -cell motors are insensitive to torsional forces that come from outside, e.g. when long girders swivel. And should a new bearing be necessary after thousands of hours or the rotating union needs to be re- sealed , replacement is easy thanks to the modular design. The components are separate from each other and do not damage each other. A very durable and sustainable construction .

Where are hydraulic XR rotators used?

INDEXATOR has an excellent reputation in Forestry and material handling . The sophisticated and proven quality of the rotators from INDEXATOR is evident in the demanding operations in Forestry and material handling. This is particularly often the case when the requirements are high and the service life of other products is not satisfactory. So it is no wonder that the INDEXATOR XR rotators are particularly used in these fields.

  • Application example 1:

Laying large blocks of stone as protection against the waves on the North Sea coast. Special requirements: large weights, underwater use in salt water.

  • Application example 2:

Wood handling in the large sawmill with 1.2 m 2 log grapple on material handler 30 t.

Special requirement: The length of the wood creates great torsional forces that act on the rotator from the outside. The previous solution with slewing ring drives caused constant repairs. No more failures occurred after conversion to XR400 .

  • Application example 3:

Handling of scrap with orange peel grab in the port with Sennebogen 870.

Special requirements:> 95% availability, 3 shift operation, 3000 L orange peel grab

  • Application example 4:

Demolition work with 5.5 t compact Excavator with steel shears.

Special requirements: limited space, large external forces due to steel shears.

INDEXATOR XR rotators are currently working all over the world in timber handling, scrap sorting , demolition work , recycling or dredging . XR rotators handle large dynamic loads in tension , compression and radial directions !

I would like to order an INDEXATOR compact rotator, what versions are there?

The XR rotators are available in the following versions :

All versions of the XR compact rotators are suitable for pendulum suspension and for permanent attachment and are available in several versions with an alternative hole pattern .

We will be happy to advise you on the selection of the compact rotator from INDEXATOR that is right for your application. We look forward to hearing from you .

You can find the right original spare parts for all INDEXATOR rotary motors in our online shop .

  • It is followed by the XR 400 with a maximum static load of 550 kN, a dynamic load of 200 kN and a radial load of 140 kN. With pendulum suspension it is suitable for material handling machines with an operating weight of approx. 25 - 45 t. With permanent attachment, it can be used together with sorting grabs on excavators with an operating weight of up to approx. 22 t. There are also various versions of the XR400 that make it easier to switch from INDEXATOR IR or Thumm 712. The newest version XR400-HAT-X2-C. Combines a particularly powerful motor with 7000 Nm with 2 large channels for e.g. a grapple saw and an additional lubrication channel. The XR400-HT-P-AV version enables 2x 80 A to be passed through, e.g. for a magnet and additional control lines for controlling other functions.
  • The next version is the XR 500 with 700kN in the standard and the C version
  • and finally the XR 600 , with a maximum load of 850kN, also as a standard version or in the C version.

In addition to these four sizes, we also offer you the aforementioned different variants with a wide variety of hole patterns and extra channels.

Buy an INDEXATOR compact rotator: what are the advantages?

  • Absolutely robust, large loads can be moved permanently and reliably
  • Insensitive to forced rotation, as is the case with sorting grippers, for example
  • Forces are transferred from the tool to the large area of the suspension
  • The risk of a defect in the engine is significantly reduced
  • Easier service and maintenance work

This torque transmission is patented by INDEXATOR!
And: with this technology , INDEXATOR is unique in the world!

In short: the INDEXATOR XR series is a product that can be relied on even under extreme conditions and downtimes can be prevented.

If you have any questions about the ideal XR rotator for your machine, you can contact our technical support at any time.

The series of XR rotators includes the compact rotators from INDEXATOR. What is special about the INDEXATOR XR rotators? The XR rotators are designed for attachment to material handlers... read more »
Close window
Buy hydraulic compact rotators from PHILIPP ForstWerkzeuge

The series of XR rotators includes the compact rotators from INDEXATOR.

What is special about the INDEXATOR XR rotators?

The XR rotators are designed for attachment to material handlers and excavators . The range includes models with maximum static loads from 30,000 kg to 85,000 kg and torques from 3,000 Nm to 7,000 Nm . They are suitable for pendulum suspension and permanent attachment.

The XR series from INDEXATOR is permanently or gimbally attached to material handling machines and Excavator . The structure of these particularly robust rotators is modular . The motor is floating in the housing , which means that torsion and loads are kept away from the motor . The entire construction of the XR rotators is designed to transfer the loads via the outer stable housing and the large slewing crane bearings .

The powerful vane -cell motors are insensitive to torsional forces that come from outside, e.g. when long girders swivel. And should a new bearing be necessary after thousands of hours or the rotating union needs to be re- sealed , replacement is easy thanks to the modular design. The components are separate from each other and do not damage each other. A very durable and sustainable construction .

Where are hydraulic XR rotators used?

INDEXATOR has an excellent reputation in Forestry and material handling . The sophisticated and proven quality of the rotators from INDEXATOR is evident in the demanding operations in Forestry and material handling. This is particularly often the case when the requirements are high and the service life of other products is not satisfactory. So it is no wonder that the INDEXATOR XR rotators are particularly used in these fields.

  • Application example 1:

Laying large blocks of stone as protection against the waves on the North Sea coast. Special requirements: large weights, underwater use in salt water.

  • Application example 2:

Wood handling in the large sawmill with 1.2 m 2 log grapple on material handler 30 t.

Special requirement: The length of the wood creates great torsional forces that act on the rotator from the outside. The previous solution with slewing ring drives caused constant repairs. No more failures occurred after conversion to XR400 .

  • Application example 3:

Handling of scrap with orange peel grab in the port with Sennebogen 870.

Special requirements:> 95% availability, 3 shift operation, 3000 L orange peel grab

  • Application example 4:

Demolition work with 5.5 t compact Excavator with steel shears.

Special requirements: limited space, large external forces due to steel shears.

INDEXATOR XR rotators are currently working all over the world in timber handling, scrap sorting , demolition work , recycling or dredging . XR rotators handle large dynamic loads in tension , compression and radial directions !

I would like to order an INDEXATOR compact rotator, what versions are there?

The XR rotators are available in the following versions :

All versions of the XR compact rotators are suitable for pendulum suspension and for permanent attachment and are available in several versions with an alternative hole pattern .

We will be happy to advise you on the selection of the compact rotator from INDEXATOR that is right for your application. We look forward to hearing from you .

You can find the right original spare parts for all INDEXATOR rotary motors in our online shop .

  • It is followed by the XR 400 with a maximum static load of 550 kN, a dynamic load of 200 kN and a radial load of 140 kN. With pendulum suspension it is suitable for material handling machines with an operating weight of approx. 25 - 45 t. With permanent attachment, it can be used together with sorting grabs on excavators with an operating weight of up to approx. 22 t. There are also various versions of the XR400 that make it easier to switch from INDEXATOR IR or Thumm 712. The newest version XR400-HAT-X2-C. Combines a particularly powerful motor with 7000 Nm with 2 large channels for e.g. a grapple saw and an additional lubrication channel. The XR400-HT-P-AV version enables 2x 80 A to be passed through, e.g. for a magnet and additional control lines for controlling other functions.
  • The next version is the XR 500 with 700kN in the standard and the C version
  • and finally the XR 600 , with a maximum load of 850kN, also as a standard version or in the C version.

In addition to these four sizes, we also offer you the aforementioned different variants with a wide variety of hole patterns and extra channels.

Buy an INDEXATOR compact rotator: what are the advantages?

  • Absolutely robust, large loads can be moved permanently and reliably
  • Insensitive to forced rotation, as is the case with sorting grippers, for example
  • Forces are transferred from the tool to the large area of the suspension
  • The risk of a defect in the engine is significantly reduced
  • Easier service and maintenance work

This torque transmission is patented by INDEXATOR!
And: with this technology , INDEXATOR is unique in the world!

In short: the INDEXATOR XR series is a product that can be relied on even under extreme conditions and downtimes can be prevented.

If you have any questions about the ideal XR rotator for your machine, you can contact our technical support at any time.

Viewed

OUR KNOW-HOW. YOUR SECURITY.

We at PHILIPP are your experienced specialists for the products of the manufacturers HULTDINS, INDEXATOR, CLARK TRACKS, NORDCHAIN, MESERA and SCHWANITZ, which stand for quality, durability and economy.

For 25 years we have been the importers and expert contacts for machine builders, body manufacturers, workshops and dealers when it comes to the market-leading products from HULTDINS and INDEXATOR.

We are happy to advise you individually and always strive to offer you the best technical solution for your application. Our claim is to recommend the most economical solution for you in the long term, which is at the same time ergonomic and ecologically sensible.

Our speciality is to create custom-made products for the respective application of our customers. In cooperation with our sister company SCHWANITZ, we develop and produce innovative solutions for the forestry, agricultural and construction industries as well as for timber transport.

Our product range includes:

We stock spare parts for all products from HULTDINS, INDEXATOR, ClarkTracks, popular MESERA /LOGLIFT® forestry cranes and many more. Even if your rotator, grapple or forestry crane has been in use for a few years, we are sure to find the right spare part for you quickly.

You can rely on us! We always have your ability to work and that of your customers in mind.

The secret of our success at PHILIPP lies in our team's comprehensive expertise, personal customer advice, market-leading product selection and professional handling. Our claim is to find product solutions that help our customers get ahead.

All orders for products in stock that we receive by 2.45 p.m. are shipped the same day by UPS or freight forwarding. Thereafter, same-day express overnight shipping is available for orders placed by 4:45 p.m. to ensure that shipments reach you by 6 a.m. the next morning.<7p>

You can reach us personally by telephone from Monday to Friday from 07:00 am to 07:00 pm and on Saturdays from 09:00 am to 01:00 pm. In urgent cases, you can also reach us outside these opening hours on +49 7221 99561-0 via call forwarding. And around the clock via our online shop.

We look forward to hearing from you!


Your PHILIPP Team