Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
2 From 2
No results were found for the filter!
2 From 2

Buy IR built-in rotators at PHILIPP ForstWerkzeuge

The IR built-in rotators from INDEXATOR are particularly strong , robust and durable rotary motors for tough recycling use and demanding material handling . They are used on large clamshell grabs on excavators and material handling machines. Their long service life ensures unsurpassed overall economy . The INDEXATOR IR20-5 , with 5 pairs of radial hydraulic connections, and INDEXATOR IR25 , with suspensions for 5 hydraulic cylinders and corresponding hydraulic connections, are predestined for polyp grabs and have proven themselves excellently for many years in demanding scrap loading .

Which models from the series of IR built-in rotators from INDEXATOR do we have in our program?

Built-in rotator IR 10

  • Strong and stable rotator for tough recycling use and demanding material handling
  • Maximum static load: 25,000 kg
  • Maximum dynamic load: 7,000 kg
  • Torque: 2,100 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Top mount: flange with bore and thread
  • Photo below: bolt circle
  • Also suitable for negative loads
  • Various hose guides and additional channels available
  • Use: Excavator, large cranes
  • Typical application: clamshell grapple, wooden grapple

Built-in rotator IR 12

  • Strong and stable rotator for tough recycling use and demanding material handling
  • Maximum static load: 25,000 kg
  • Maximum dynamic load: 7,000 kg
  • Torque: 2,900 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Top mount: flange with bore and thread
  • Photo below: bolt circle
  • Also suitable for negative loads
  • Various hose guides and additional channels available
  • Use: Excavator, large cranes, harvesters
  • Typical application: clamshell grapple, wood grapple, scrap grapple, Harvester heads

 

Built-in rotator IR 20

  • Strong and stable rotator for tough recycling use and demanding material handling
  • Maximum static load: 45,000 kg
  • Maximum dynamic load: 15,000 kg
  • Torque: 4,100 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Top mount: flange with bore and thread
  • Photo below: bolt circle
  • Also suitable for negative loads
  • Various hose guides and additional channels available
  • Use: Excavator, large cranes
  • Typical application: clamshell grapple, multi-shell grapple, scrap grapple

Built-in rotator IR 22

  • Strong and stable rotator for tough recycling use and demanding material handling
  • Maximum static load: 45,000 kg
  • Maximum dynamic load: 15,000 kg
  • Torque: 4,100 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Top mount: flange with bore and thread
  • Photo below: bolt circle
  • Also suitable for negative loads
  • Various hose guides and additional channels available
  • Use: Excavator, large cranes
  • Typical application: wood grapple, clamshell grapple, multi-shell grapple, scrap grapple

 

Built-in rotator IR 25

  • Strong and stable rotator for tough recycling use and demanding material handling
  • Maximum static load: 45,000 kg
  • Maximum dynamic load: 20,000 kg
  • Torque: 4,100 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Top mount: Solid pin (109 mm) with hole (60 mm)
  • Bottom mount: flange
  • Also suitable for negative loads
  • Use: Excavator, large cranes, skidders
  • Typical application: multi-shell grapple, scrap grab

We would be happy to advise you on the selection of the right built-in rotator model for your application.

Suitable spare parts for your built-in rotator from INDEXATOR can be found in our digital spare parts lists or via our spare parts finder for rotators.

The IR built-in rotators from INDEXATOR are particularly strong , robust and durable rotary motors for tough recycling use and demanding material handling . They are used on large... read more »
Close window
Buy IR built-in rotators at PHILIPP ForstWerkzeuge

The IR built-in rotators from INDEXATOR are particularly strong , robust and durable rotary motors for tough recycling use and demanding material handling . They are used on large clamshell grabs on excavators and material handling machines. Their long service life ensures unsurpassed overall economy . The INDEXATOR IR20-5 , with 5 pairs of radial hydraulic connections, and INDEXATOR IR25 , with suspensions for 5 hydraulic cylinders and corresponding hydraulic connections, are predestined for polyp grabs and have proven themselves excellently for many years in demanding scrap loading .

Which models from the series of IR built-in rotators from INDEXATOR do we have in our program?

Built-in rotator IR 10

  • Strong and stable rotator for tough recycling use and demanding material handling
  • Maximum static load: 25,000 kg
  • Maximum dynamic load: 7,000 kg
  • Torque: 2,100 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Top mount: flange with bore and thread
  • Photo below: bolt circle
  • Also suitable for negative loads
  • Various hose guides and additional channels available
  • Use: Excavator, large cranes
  • Typical application: clamshell grapple, wooden grapple

Built-in rotator IR 12

  • Strong and stable rotator for tough recycling use and demanding material handling
  • Maximum static load: 25,000 kg
  • Maximum dynamic load: 7,000 kg
  • Torque: 2,900 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Top mount: flange with bore and thread
  • Photo below: bolt circle
  • Also suitable for negative loads
  • Various hose guides and additional channels available
  • Use: Excavator, large cranes, harvesters
  • Typical application: clamshell grapple, wood grapple, scrap grapple, Harvester heads

 

Built-in rotator IR 20

  • Strong and stable rotator for tough recycling use and demanding material handling
  • Maximum static load: 45,000 kg
  • Maximum dynamic load: 15,000 kg
  • Torque: 4,100 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Top mount: flange with bore and thread
  • Photo below: bolt circle
  • Also suitable for negative loads
  • Various hose guides and additional channels available
  • Use: Excavator, large cranes
  • Typical application: clamshell grapple, multi-shell grapple, scrap grapple

Built-in rotator IR 22

  • Strong and stable rotator for tough recycling use and demanding material handling
  • Maximum static load: 45,000 kg
  • Maximum dynamic load: 15,000 kg
  • Torque: 4,100 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Top mount: flange with bore and thread
  • Photo below: bolt circle
  • Also suitable for negative loads
  • Various hose guides and additional channels available
  • Use: Excavator, large cranes
  • Typical application: wood grapple, clamshell grapple, multi-shell grapple, scrap grapple

 

Built-in rotator IR 25

  • Strong and stable rotator for tough recycling use and demanding material handling
  • Maximum static load: 45,000 kg
  • Maximum dynamic load: 20,000 kg
  • Torque: 4,100 Nm at 250 bar
  • Low oil requirement: 35 l / min
  • Top mount: Solid pin (109 mm) with hole (60 mm)
  • Bottom mount: flange
  • Also suitable for negative loads
  • Use: Excavator, large cranes, skidders
  • Typical application: multi-shell grapple, scrap grab

We would be happy to advise you on the selection of the right built-in rotator model for your application.

Suitable spare parts for your built-in rotator from INDEXATOR can be found in our digital spare parts lists or via our spare parts finder for rotators.

Viewed

OUR KNOW-HOW. YOUR SECURITY.

We at PHILIPP are your experienced specialists for the products of the manufacturers HULTDINS, INDEXATOR, CLARK TRACKS, NORDCHAIN, MESERA and SCHWANITZ, which stand for quality, durability and economy.

For 25 years we have been the importers and expert contacts for machine builders, body manufacturers, workshops and dealers when it comes to the market-leading products from HULTDINS and INDEXATOR.

We are happy to advise you individually and always strive to offer you the best technical solution for your application. Our claim is to recommend the most economical solution for you in the long term, which is at the same time ergonomic and ecologically sensible.

Our speciality is to create custom-made products for the respective application of our customers. In cooperation with our sister company SCHWANITZ, we develop and produce innovative solutions for the forestry, agricultural and construction industries as well as for timber transport.

Our product range includes:

We stock spare parts for all products from HULTDINS, INDEXATOR, ClarkTracks, popular MESERA /LOGLIFT® forestry cranes and many more. Even if your rotator, grapple or forestry crane has been in use for a few years, we are sure to find the right spare part for you quickly.

You can rely on us! We always have your ability to work and that of your customers in mind.

The secret of our success at PHILIPP lies in our team's comprehensive expertise, personal customer advice, market-leading product selection and professional handling. Our claim is to find product solutions that help our customers get ahead.

All orders for products in stock that we receive by 2.45 p.m. are shipped the same day by UPS or freight forwarding. Thereafter, same-day express overnight shipping is available for orders placed by 4:45 p.m. to ensure that shipments reach you by 6 a.m. the next morning.<7p>

You can reach us personally by telephone from Monday to Friday from 07:00 am to 07:00 pm and on Saturdays from 09:00 am to 01:00 pm. In urgent cases, you can also reach us outside these opening hours on +49 7221 99561-0 via call forwarding. And around the clock via our online shop.

We look forward to hearing from you!


Your PHILIPP Team