Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 5
No results were found for the filter!
1 From 5

Hydraulic damping systems

For your loading crane , Front loader , wheel loader , forklift and / or Excavator , we recommend the hydraulic damping systems from HULTDINS .

How do the hydraulic damping systems from HULTDINS work?

Unsprung vehicles with one- sided load in the Front loader , in the shovel or on the fork of the forklift tend to rock . Then the driving speed has to be reduced , which costs time and productivity drops . The vibrations can be effectively reduced with a HULTDINS damping system. The result is a completely new and more pleasant driving experience . In addition , equipment and load are spared and productivity increases . A manageable investment with a big impact .

How do HULTDINS hydraulic damping systems work?

Depending on the size of the crane , the damping system consists of several accumulators (= pressure accumulators) with different preloads. If there are jerky movements , the pressure peaks are absorbed by the gas bubbles and eliminated . This works through the use of specially adapted throttle valves .

Various HULTDINS damping models are available :

Hydraulic crane damping

The hydraulic crane damping provides optimal protection against vibrations and oscillations . HULTDINS builds them for all types of cranes, from the smallest timber trailer to large container cranes . The large crane manufacturers such as Palfinger Epsilon, Loglift, Mesera and Penz install them in their cranes as an option.

Crane dampers always consist of a set consisting of a lifting cylinder damping and a swing cylinder damping .

Reduce material fatigue:

HULTDINS has designed the hydraulic crane dampers in such a way that both pressure peaks and vibrations are optimally dampened . This significantly reduces the risk of failure due to material fatigue in the crane or the crane bracket .

You work more effectively:

Practical tests with the hydraulic crane dampers have shown that the work result can be improved by up to 30% due to the faster crane movements . When Forwarder , the crane work takes up approx. 75% of the working time .

Hydraulic drive vibration damping for wheel loaders, Front loader, forklifts

HULTDINS offers hydraulic drive vibration damping for wheel loaders , Front loader and forklifts . The use of driving vibration damping significantly reduces wear on the machine and protects the driver's health .

The hydraulic travel vibration damping consists of gas -filled accumulators (= pressure accumulators) in combination with specially adapted throttle valves .

If you compare the suspension of a car , you can compare an accumulator with a compression spring and the throttle valve with a shock absorber . Optimally designed, they support driving comfort in every position of the vehicle .

The assembly is very simple : you install a T-piece at the connection of the cylinder and connect it to the accumulator .

The hydraulic drive vibration damping works - with or without a load , over short or long distances . If weight and distance are always constant , one accumulator is sufficient . If you want to be optimally equipped for all movements and weight , then up to four batteries can be installed .

An optional electronic shutdown device is available . You can then switch the cushioning on and off without having to move the lift arms .

A machine with hydraulic travel vibration damping is a machine that is easy to control and runs stably . In addition, you can do your work much faster , shocks , impacts and vibrations are absorbed .

Hydraulic boom dampers for Mini excavator

Mini Mini excavator are often close to the ground and have rather simple hydraulics . This makes working with the Mini excavator quite uneasy . If you install hydraulic boom damping from HULTDINS, your work will be much more pleasant .

Driver and your machine last longer :

The hydraulic damping system from HULTDINS is easy to assemble and brings quick benefits . Working feels calmer , vibrations are reduced and thus wear on the machine and the driver. As a result, you and your machine will last longer.

You save time :

The more unnecessary movements and vibrations that are avoided , the faster you can get your job done . The cushioning system gives you better control over the movements of your mini excavator .

Easy installation :

The installation instructions are short and sweet . Connect the damper to the cylinder of your mini excavator. To do this, install a T-piece on the plus side and one on the minus side . Connect the attenuators . You're done!

HULTDINS crane damping systems at PHILIPP ForstWerkzeuge

HULTDINS was founded in 1928. After the idea of their own forge was born, the focus from then on was on building horse-drawn carriages. In 1956 the turning point came to the development of forestry tools. In 1963 the company already had 30 employees and an annual turnover of 2 million Swedish kronor. Today, HULTDINS is the largest manufacturer of professional timber grapples and hydraulically powered saws in the world!

We at PHILIPP ForstWerkzeuge are happy to order the right product for you and also ensure the supply of spare parts - even many years after purchase. Have we convinced you to buy a hydraulic damping system for your loading crane, Front loader, wheel loader, forklift or Excavator ? Just talk to us or order in our online shop!

For your loading crane , Front loader , wheel loader , forklift and / or Excavator , we recommend the hydraulic damping systems from HULTDINS . How do the hydraulic... read more »
Close window
Hydraulic damping systems

For your loading crane , Front loader , wheel loader , forklift and / or Excavator , we recommend the hydraulic damping systems from HULTDINS .

How do the hydraulic damping systems from HULTDINS work?

Unsprung vehicles with one- sided load in the Front loader , in the shovel or on the fork of the forklift tend to rock . Then the driving speed has to be reduced , which costs time and productivity drops . The vibrations can be effectively reduced with a HULTDINS damping system. The result is a completely new and more pleasant driving experience . In addition , equipment and load are spared and productivity increases . A manageable investment with a big impact .

How do HULTDINS hydraulic damping systems work?

Depending on the size of the crane , the damping system consists of several accumulators (= pressure accumulators) with different preloads. If there are jerky movements , the pressure peaks are absorbed by the gas bubbles and eliminated . This works through the use of specially adapted throttle valves .

Various HULTDINS damping models are available :

Hydraulic crane damping

The hydraulic crane damping provides optimal protection against vibrations and oscillations . HULTDINS builds them for all types of cranes, from the smallest timber trailer to large container cranes . The large crane manufacturers such as Palfinger Epsilon, Loglift, Mesera and Penz install them in their cranes as an option.

Crane dampers always consist of a set consisting of a lifting cylinder damping and a swing cylinder damping .

Reduce material fatigue:

HULTDINS has designed the hydraulic crane dampers in such a way that both pressure peaks and vibrations are optimally dampened . This significantly reduces the risk of failure due to material fatigue in the crane or the crane bracket .

You work more effectively:

Practical tests with the hydraulic crane dampers have shown that the work result can be improved by up to 30% due to the faster crane movements . When Forwarder , the crane work takes up approx. 75% of the working time .

Hydraulic drive vibration damping for wheel loaders, Front loader, forklifts

HULTDINS offers hydraulic drive vibration damping for wheel loaders , Front loader and forklifts . The use of driving vibration damping significantly reduces wear on the machine and protects the driver's health .

The hydraulic travel vibration damping consists of gas -filled accumulators (= pressure accumulators) in combination with specially adapted throttle valves .

If you compare the suspension of a car , you can compare an accumulator with a compression spring and the throttle valve with a shock absorber . Optimally designed, they support driving comfort in every position of the vehicle .

The assembly is very simple : you install a T-piece at the connection of the cylinder and connect it to the accumulator .

The hydraulic drive vibration damping works - with or without a load , over short or long distances . If weight and distance are always constant , one accumulator is sufficient . If you want to be optimally equipped for all movements and weight , then up to four batteries can be installed .

An optional electronic shutdown device is available . You can then switch the cushioning on and off without having to move the lift arms .

A machine with hydraulic travel vibration damping is a machine that is easy to control and runs stably . In addition, you can do your work much faster , shocks , impacts and vibrations are absorbed .

Hydraulic boom dampers for Mini excavator

Mini Mini excavator are often close to the ground and have rather simple hydraulics . This makes working with the Mini excavator quite uneasy . If you install hydraulic boom damping from HULTDINS, your work will be much more pleasant .

Driver and your machine last longer :

The hydraulic damping system from HULTDINS is easy to assemble and brings quick benefits . Working feels calmer , vibrations are reduced and thus wear on the machine and the driver. As a result, you and your machine will last longer.

You save time :

The more unnecessary movements and vibrations that are avoided , the faster you can get your job done . The cushioning system gives you better control over the movements of your mini excavator .

Easy installation :

The installation instructions are short and sweet . Connect the damper to the cylinder of your mini excavator. To do this, install a T-piece on the plus side and one on the minus side . Connect the attenuators . You're done!

HULTDINS crane damping systems at PHILIPP ForstWerkzeuge

HULTDINS was founded in 1928. After the idea of their own forge was born, the focus from then on was on building horse-drawn carriages. In 1956 the turning point came to the development of forestry tools. In 1963 the company already had 30 employees and an annual turnover of 2 million Swedish kronor. Today, HULTDINS is the largest manufacturer of professional timber grapples and hydraulically powered saws in the world!

We at PHILIPP ForstWerkzeuge are happy to order the right product for you and also ensure the supply of spare parts - even many years after purchase. Have we convinced you to buy a hydraulic damping system for your loading crane, Front loader, wheel loader, forklift or Excavator ? Just talk to us or order in our online shop!

Viewed

OUR KNOW-HOW. YOUR SECURITY.

We at PHILIPP are your experienced specialists for the products of the manufacturers HULTDINS, INDEXATOR, CLARK TRACKS, NORDCHAIN, MESERA and SCHWANITZ, which stand for quality, durability and economy.

For 25 years we have been the importers and expert contacts for machine builders, body manufacturers, workshops and dealers when it comes to the market-leading products from HULTDINS and INDEXATOR.

We are happy to advise you individually and always strive to offer you the best technical solution for your application. Our claim is to recommend the most economical solution for you in the long term, which is at the same time ergonomic and ecologically sensible.

Our speciality is to create custom-made products for the respective application of our customers. In cooperation with our sister company SCHWANITZ, we develop and produce innovative solutions for the forestry, agricultural and construction industries as well as for timber transport.

Our product range includes:

We stock spare parts for all products from HULTDINS, INDEXATOR, ClarkTracks, popular MESERA /LOGLIFT® forestry cranes and many more. Even if your rotator, grapple or forestry crane has been in use for a few years, we are sure to find the right spare part for you quickly.

You can rely on us! We always have your ability to work and that of your customers in mind.

The secret of our success at PHILIPP lies in our team's comprehensive expertise, personal customer advice, market-leading product selection and professional handling. Our claim is to find product solutions that help our customers get ahead.

All orders for products in stock that we receive by 2.45 p.m. are shipped the same day by UPS or freight forwarding. Thereafter, same-day express overnight shipping is available for orders placed by 4:45 p.m. to ensure that shipments reach you by 6 a.m. the next morning.<7p>

You can reach us personally by telephone from Monday to Friday from 07:00 am to 07:00 pm and on Saturdays from 09:00 am to 01:00 pm. In urgent cases, you can also reach us outside these opening hours on +49 7221 99561-0 via call forwarding. And around the clock via our online shop.

We look forward to hearing from you!


Your PHILIPP Team