Close filters
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

Buy HULTDINS sorting grabs at PHILIPP forest tools

The HULTDINS MultiGrip-T gripper is a stable sorting gripper that can be used in a variety of ways for handling and sorting . Its claws grip point after point . They consist of four stable bars that are stiffened by perforated sheets. The sorting grab is therefore very well suited for sorting and handling construction waste , beams , pipes , scrap , residual wood or waste .

When developing the MultiGrip grabs, HULTDINS was able to fall back on the extensive and long-term experience in the production of professional timber grabs. All the equipment features that distinguish the SuperGrip grippers from HULTDINS can also be found in the MultiGrip grippers.

The high-quality sorting grabs from HULTDINS are equipped with a very stable upper part , 2 parallel bars made of solid material and a durable cylinder with end position cushioning . An accumulator and a load-holding valve are integrated into the upper part. The claw plates are made of 20 mm Weldox steel and have mechanical stops in both end positions. The stable claw cutting edge is made of Hardox as a reversible wear plate.

The MultiGrip-T grippers, MG-T for short, are available with all common holders for quick couplers and also with a holder for INDEXATOR XR rotators. We are guided here entirely by your requirements. We can also deliver the MultiGrip-T with a plate to attach your individual quick coupler.

The HULTDINS MultiGrip-T is available in 2 sizes:

  • MultiGrip 16-T
    • For excavators 12-18 t in permanent attachment
    • Opening width: 1,773 mm
    • Calculated cross-sectional area: 0.36 sqm
    • Practical cross-sectional area: 0.42 square meters
    • Weight: 630 kg
    • Continuous load max. 10,000 kg

  • MultiGrip 20-T
    • For excavators 16-22 t
    • Opening width: 2,279 mm
    • Calculated cross-sectional area: 0.52 square meters
    • Practical cross-sectional area: 0.62 square meters
    • Weight: 900 kg
    • Continuous load max. 10,000 kg

For example, the following recordings are available:

Alternatively: plate for attaching an individual quick coupler

Are you looking for a suitable sorting grab for your excavator? We would be happy to advise you personally. You are welcome to contact our competent staff by phone.

The HULTDINS MultiGrip-T gripper is a stable sorting gripper that can be used in a variety of ways for handling and sorting . Its claws grip point after point . They consist of four... read more »
Close window
Buy HULTDINS sorting grabs at PHILIPP forest tools

The HULTDINS MultiGrip-T gripper is a stable sorting gripper that can be used in a variety of ways for handling and sorting . Its claws grip point after point . They consist of four stable bars that are stiffened by perforated sheets. The sorting grab is therefore very well suited for sorting and handling construction waste , beams , pipes , scrap , residual wood or waste .

When developing the MultiGrip grabs, HULTDINS was able to fall back on the extensive and long-term experience in the production of professional timber grabs. All the equipment features that distinguish the SuperGrip grippers from HULTDINS can also be found in the MultiGrip grippers.

The high-quality sorting grabs from HULTDINS are equipped with a very stable upper part , 2 parallel bars made of solid material and a durable cylinder with end position cushioning . An accumulator and a load-holding valve are integrated into the upper part. The claw plates are made of 20 mm Weldox steel and have mechanical stops in both end positions. The stable claw cutting edge is made of Hardox as a reversible wear plate.

The MultiGrip-T grippers, MG-T for short, are available with all common holders for quick couplers and also with a holder for INDEXATOR XR rotators. We are guided here entirely by your requirements. We can also deliver the MultiGrip-T with a plate to attach your individual quick coupler.

The HULTDINS MultiGrip-T is available in 2 sizes:

  • MultiGrip 16-T
    • For excavators 12-18 t in permanent attachment
    • Opening width: 1,773 mm
    • Calculated cross-sectional area: 0.36 sqm
    • Practical cross-sectional area: 0.42 square meters
    • Weight: 630 kg
    • Continuous load max. 10,000 kg

  • MultiGrip 20-T
    • For excavators 16-22 t
    • Opening width: 2,279 mm
    • Calculated cross-sectional area: 0.52 square meters
    • Practical cross-sectional area: 0.62 square meters
    • Weight: 900 kg
    • Continuous load max. 10,000 kg

For example, the following recordings are available:

Alternatively: plate for attaching an individual quick coupler

Are you looking for a suitable sorting grab for your excavator? We would be happy to advise you personally. You are welcome to contact our competent staff by phone.

Viewed

OUR KNOW-HOW. YOUR SECURITY.

We at PHILIPP ForstWerkzeuge are your experienced specialists for the products of the brands HULTDINS, INDEXATOR, CLARK TRACKS and NORDCHAIN .

For more than 20 years we have been the expert contact for machine builders, body manufacturers and workshops when it comes to the market leading products from HULTDINS and INDEXATOR .

We would be happy to advise you individually and strive to always offer you the best technical solution for your application . Our aim is to recommend the most economical long-term solution for you , which is ergonomically and ecologically sensible at the same time.

Our product range includes:

We ensure the supply of spare parts for our entire product range - even many years after the purchase.

We stock all the important spare parts for HULTDINS and INDEXATOR , as well as many spare parts that are only needed occasionally. We always keep an eye on your ability to work and that of your customers. You can rely on us!

All orders that we receive until 3 p.m. for products in stock are dispatched the same day by UPS or forwarding agent. Then same day if you order by 4:45 p.m. by express.

Even if your last order was several years ago, we are and will remain your contact person and will be happy to provide you with comprehensive support. At PHILIPP ForstWerkzeuge we stand for individual advice , specialist knowledge, accessibility and the availability of our products .

You can reach us personally by phone from Monday to Friday from 7 a.m. to 7 p.m., on Saturdays from 9 a.m. to 1 p.m. and in urgent cases also by diverting calls outside of these opening hours.