tracks for use on slopes
Forest tapes from CLARK TRACKS are the right choice for demanding work on slopes that require excellent climbing properties. The basis is the particularly wear -resistant boron steel from which the profiles are rolled . The floor slabs are hardened and tempered in several steps in order to achieve high surface hardness (> 700 Hv) with simultaneous toughness .
The following options are available to transfer tractive force between the wheel and the ground :
- Frictional connection through static friction
A large surface and a good coefficient of static friction are desirable for this. The good power transmission of the 1000 mm wide TXL150 floor plate is essentially based on this principle . - Positive connection through toothing
The edges of floor slabs or spikes can be supported on rocks, stones, roots and on the topsoil .
In practice , both principles work as a combination with belts. On hard floors , great forces can be transmitted through the interlocking , which works via crossbars and spikes . In order to avoid lanes , avoiding slip is a crucial component. This works well with climbing bands, at the same time the bands can leave clear marks depending on the shape of the webs and spikes .
If you want to buy forest belts for use on slopes , we have summarized the best models for you:
CS is the front runner when it comes to traction on slopes . It enables safe work in particularly difficult operations on the mountain . It offers excellent grip lengthways and crossways. The tape is based on the GL84 base plate. While two 75 mm wide crossbars are welded onto the side of one of the base plates, a 75 mm wide crossbar is arranged in the middle of the next base plate and two 70 m long spikes on the outside. The belt is mainly used on harvesters .
Location: steep slope , snow , harvester
CX is the climbing strap for haulers , combination machines , skidders and harvesters . It is based on the GL84 base plate. In addition, two 75 mm wide crossbars are welded to the side of the base plate. CX ensures maximum propulsion on rock , but also on loamy soil . CX is most similar to Olofsfors EX ™, but it has more of a load-bearing role.
Location: steep slope , snow , thinning , low mountain range , forwarder , harvester , Combination machine
GL84 can be called a universal tape. The stable base plate with a height of 60 mm offers good traction and load-bearing properties . If the floor slabs are also equipped with 2 spikes in staggered rows or alternately with 2 spikes / 3 spikes , the result is a very good climbing tape with excellent grip in the longitudinal and transverse direction . GL84 belts can be used in demanding , steep terrain as well as in regular thinning.
Location: steep slope , low mountain range , snow , thinning , forwarder , harvester , Combination machine
RL50 is a very stable 50 mm wide and high base plate . The tape is very suitable for use on hard, rocky and cohesive ground when other tapes become clogged. If the floor panels are additionally equipped with 2 spikes in staggered rows or alternately with 2 spikes / 3 spikes , the result is a climbing band with excellent grip in the longitudinal and transverse direction. The slip between the belt and the tire is minimal . The tape is often used on slope forwarders on the front axle because it offers very good grip and therefore safety . It is easy and quick to assemble - the weight is low .
Location: steep slopes , low mountain ranges, snow , stony soils , clay soils, slope forwarders , harvesters
tracks in use: what should you watch out for?
If forest belts are used on a machine, the following must be observed in principle:
- Choosing the right track : depending on the ground conditions and the type of machine.
- tracks tighten and tension the bogie tapes, and re-tension them regularly
- Inflate tires to the maximum permitted tire pressure
- Check that the ligaments are also at maximum twist
do not touch any machine parts - Renew spikes in good time to avoid slippage
- In the event of a strong steering angle and one-sided driving over obstacles, observe whether the straps are securely seated on the tire
Used correctly: what are the advantages of CLARK TRACKS tracks?
These reasons speak in favor of buying a forest belt from Clark Track:
- Thanks to the improved stability, you can take full advantage of the performance of your machine.
- As the tires do not sink in, fuel consumption is reduced.
- Compaction and traces are avoided, so the soil is protected.
- The larger contact surface improves traction.
- The contact surface pressure is reduced.
- Your tires are better protected.
Would you like to buy a CLARK TRACKS track for use on slopes? Please do not hesitate to contact us , we will advise you and accompany you through the entire ordering process.