Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 7
No results were found for the filter!
1 From 7

Buy INDEXATOR GV hydraulic rotators for wood Timber grapples at PHILIPP ForstWerkzeuge

INDEXATOR GV rotators are powerful rotary motors with a long service life and designed for the toughest conditions. Ideally suitable for many different Timber grapples series , they increase the performance and flexibility of every wood grapple.

What is special about the INDEXATOR GV rotators?

The GV3, GV4 and GV6 series are available in numerous versions with various mountings for above and below. With static loads of 3,000 - 6,000 kg, they are suitable for Forwarding trailer, Front loader, municipal vehicles and building material cranes.

The GV12, GV14-S and GV17-S series are the best-selling rotators for professional use on forest machines , Timber truck and excavators in sawmills .

The static loads range from 10,000-16,000 kg, the torques are 2,200 to 3,300 Nm.

The GV124 version offers 4 rotary feedthroughs - it is the typical version for grapple saws on trucks and the particularly robust version GV124-S-203 for Excavator in the sawmill.

Our product range includes all INDEXATOR GV models for Timber grapples :

The GV 3 rotator:

  • Maximum static load: 3,000 kg
  • Maximum dynamic load: 1,250 kg
  • Torque: 950 Nm at 250 bar
  • Low oil requirement: 10 l / min
  • Light, compact and powerful
  • Different mountings for top and bottom (shaft, flange) available
  • 1 hose protection bracket available
  • Use: lighter forest and agricultural machinery, general cargo cranes

The GV 4 rotator:

  • Maximum static load: 4,500 kg
  • Maximum dynamic load: 2,500 kg
  • Torque: 1,150 Nm at 250 bar
  • Low oil requirement: 10 l / min
  • Light, compact and powerful
  • Different mountings for top and bottom (shaft, flange) available
  • 1 hose protection bracket available
  • Use: lighter forest and agricultural machinery, general cargo cranes

The GV 6 rotator:

  • Maximum static load: 6,000 kg
  • Maximum dynamic load: 2,500 kg
  • Torque: 1,400 Nm at 200 bar
  • Low oil requirement: 25 l / min
  • Light, compact and powerful
  • Different mountings for top and bottom (shaft, flange) available
  • Depending on the model, 1 or 2 hose protection bars are available
  • Use: easier material handling

The GV 12 rotator:

  • Maximum static load: 10,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 2,200 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Very durable construction
  • Different mountings for top and bottom (shaft, flange) available
  • Depending on the model, 1 or 2 hose protection bars are available
  • Use: suitable for professional forest management

The GV 14-S rotator:

  • Maximum static load: 10,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 3,300 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Very durable construction
  • Bottom mount: flange
  • Various shots available for above
  • 1 hose protection bracket available
  • Use: suitable for tough applications, designed for axial and radial loads

The GV 17-S rotator:

  • Maximum static load: 16,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 3,300 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Very durable construction
  • Bottom mount: flange
  • Various shots available for above
  • 1 hose protection bracket available
  • Use: built for heavy equipment and hard work
  • Advantages: Construction robust and powerful, high torque, flexible with different interfaces to swing damper/ joint and tool

Matching links joints and pendulum brakes from swing dampers are available for all GV rotators .

Any questions? Contact us for a non-binding professional advice from our qualified employees.

INDEXATOR GV rotators are powerful rotary motors with a long service life and designed for the toughest conditions. Ideally suitable for many different Timber grapples series , they increase the... read more »
Close window
Buy INDEXATOR GV hydraulic rotators for wood Timber grapples at PHILIPP ForstWerkzeuge

INDEXATOR GV rotators are powerful rotary motors with a long service life and designed for the toughest conditions. Ideally suitable for many different Timber grapples series , they increase the performance and flexibility of every wood grapple.

What is special about the INDEXATOR GV rotators?

The GV3, GV4 and GV6 series are available in numerous versions with various mountings for above and below. With static loads of 3,000 - 6,000 kg, they are suitable for Forwarding trailer, Front loader, municipal vehicles and building material cranes.

The GV12, GV14-S and GV17-S series are the best-selling rotators for professional use on forest machines , Timber truck and excavators in sawmills .

The static loads range from 10,000-16,000 kg, the torques are 2,200 to 3,300 Nm.

The GV124 version offers 4 rotary feedthroughs - it is the typical version for grapple saws on trucks and the particularly robust version GV124-S-203 for Excavator in the sawmill.

Our product range includes all INDEXATOR GV models for Timber grapples :

The GV 3 rotator:

  • Maximum static load: 3,000 kg
  • Maximum dynamic load: 1,250 kg
  • Torque: 950 Nm at 250 bar
  • Low oil requirement: 10 l / min
  • Light, compact and powerful
  • Different mountings for top and bottom (shaft, flange) available
  • 1 hose protection bracket available
  • Use: lighter forest and agricultural machinery, general cargo cranes

The GV 4 rotator:

  • Maximum static load: 4,500 kg
  • Maximum dynamic load: 2,500 kg
  • Torque: 1,150 Nm at 250 bar
  • Low oil requirement: 10 l / min
  • Light, compact and powerful
  • Different mountings for top and bottom (shaft, flange) available
  • 1 hose protection bracket available
  • Use: lighter forest and agricultural machinery, general cargo cranes

The GV 6 rotator:

  • Maximum static load: 6,000 kg
  • Maximum dynamic load: 2,500 kg
  • Torque: 1,400 Nm at 200 bar
  • Low oil requirement: 25 l / min
  • Light, compact and powerful
  • Different mountings for top and bottom (shaft, flange) available
  • Depending on the model, 1 or 2 hose protection bars are available
  • Use: easier material handling

The GV 12 rotator:

  • Maximum static load: 10,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 2,200 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Very durable construction
  • Different mountings for top and bottom (shaft, flange) available
  • Depending on the model, 1 or 2 hose protection bars are available
  • Use: suitable for professional forest management

The GV 14-S rotator:

  • Maximum static load: 10,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 3,300 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Very durable construction
  • Bottom mount: flange
  • Various shots available for above
  • 1 hose protection bracket available
  • Use: suitable for tough applications, designed for axial and radial loads

The GV 17-S rotator:

  • Maximum static load: 16,000 kg
  • Maximum dynamic load: 5,000 kg
  • Torque: 3,300 Nm at 250 bar
  • Low oil requirement: 25 l / min
  • Very durable construction
  • Bottom mount: flange
  • Various shots available for above
  • 1 hose protection bracket available
  • Use: built for heavy equipment and hard work
  • Advantages: Construction robust and powerful, high torque, flexible with different interfaces to swing damper/ joint and tool

Matching links joints and pendulum brakes from swing dampers are available for all GV rotators .

Any questions? Contact us for a non-binding professional advice from our qualified employees.

Viewed

OUR KNOW-HOW. YOUR SECURITY.

We at PHILIPP are your experienced specialists for the products of the manufacturers HULTDINS, INDEXATOR, CLARK TRACKS, NORDCHAIN, MESERA and SCHWANITZ, which stand for quality, durability and economy.

For 25 years we have been the importers and expert contacts for machine builders, body manufacturers, workshops and dealers when it comes to the market-leading products from HULTDINS and INDEXATOR.

We are happy to advise you individually and always strive to offer you the best technical solution for your application. Our claim is to recommend the most economical solution for you in the long term, which is at the same time ergonomic and ecologically sensible.

Our speciality is to create custom-made products for the respective application of our customers. In cooperation with our sister company SCHWANITZ, we develop and produce innovative solutions for the forestry, agricultural and construction industries as well as for timber transport.

Our product range includes:

We stock spare parts for all products from HULTDINS, INDEXATOR, ClarkTracks, popular MESERA /LOGLIFT® forestry cranes and many more. Even if your rotator, grapple or forestry crane has been in use for a few years, we are sure to find the right spare part for you quickly.

You can rely on us! We always have your ability to work and that of your customers in mind.

The secret of our success at PHILIPP lies in our team's comprehensive expertise, personal customer advice, market-leading product selection and professional handling. Our claim is to find product solutions that help our customers get ahead.

All orders for products in stock that we receive by 2.45 p.m. are shipped the same day by UPS or freight forwarding. Thereafter, same-day express overnight shipping is available for orders placed by 4:45 p.m. to ensure that shipments reach you by 6 a.m. the next morning.<7p>

You can reach us personally by telephone from Monday to Friday from 07:00 am to 07:00 pm and on Saturdays from 09:00 am to 01:00 pm. In urgent cases, you can also reach us outside these opening hours on +49 7221 99561-0 via call forwarding. And around the clock via our online shop.

We look forward to hearing from you!


Your PHILIPP Team